|
Fluke 700LTP
Low Pressure Test Pump
Click image to enlarge
|
Fluke 700LTP Low Pressure Test Pump
Description: The Fluke 700LTP is a hand operated pressure pump designed to generate either vacuum
to -12 psi / -.85 bar or pressures to 30 psi / 2000 mbar. The Fluke 700LTP has two pressure ports with push fit connectors. These push fit connectors,
one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test, connect to the supplied test
hoses. These test hoses are terminated with 1/4-BSP (ISO228) female parallel thread fittings that can be adapted using the fittings included.
|
| Model |
Description |
List Price |
Sale Price |
| 700LTP |
LOW-PRESSURE TEST PUMP FOR PRESSURES 30 PSI/ 2 BAR - Discontinued - replaced by Fluke 700LTP-1 |
 Click here to download the 700LTP Instruction Sheet (PDF, 59kB)
Application: The Fluke 700LTP is primarily intended for low pressure applications. It features a fine adjust vernier with
.00145 / limbar resolution at low pressures. The pressure variation achievable with the vernier will depend on the nominal pressure and total pressurized volume,
but with minimum volume and maximum pressure the vernier provides 30 psi +/- 6 psi. The adjustable pressure relief valve features a slow-bleed capability that
allows the user to slowly release pressure at a controlled rate to achieve a desired pressure.
Included:
- Adapter to convert the reference port hose fitting to 1/4" ISO tapered female
- Adapter to convert the reference port hose fitting to 1/4" NPT female for connection to 700 series pressure modules (2 included)
- One 1/4" NPT male to 1/8" NPT male adapter
- One seal kit
- Instruction sheet in English
Material: Bright nickel plated brass, clear anodized aluminum
Dimensions: 6.7" x 1.8", 150 mm x 46 mm
Weight: 1/3 lbs. / 600 g
Warranty: One year
|
Looking for an accessory not listed here?
Check the Fluke Accessory page or look on the Fluke Price List
|
;)
