Fluke 434/Basic Power Quality Analyzer

Product Home | Features | Specifications | Models, Options, Accessories & Discounted Prices

Technical Data
Inputs
Number	4 voltage and current (3 phases + neutral)
Maximum voltage	1000 Vrms (6 kV peak)
Maximum sampling speed	200 kS/s on each channel simultaneously
Volt/Amps/Hertz
Vrms (AC + DC)
Measurement range	1 ... 1000 V
Accuracy	0.5% of Vnom
Vpeak
Measurement range	1 ... 1400 V
Accuracy	5% of Vnom
Crest factor
Measurement range	1.0 ... > 2.8
Accuracy	±5%
Arms (AC + DC)
Measurement range	0 ... 20 kA
Accuracy	±1% ± 5 counts
Apeak
Measurement range	0 ... 5.5 kA
Accuracy	5%
Crest factor
Measurement range	1 ... 10
Accuracy	±5%
Hz (60 Hz nominal)
Measurement range	51.00 ... 69.00 Hz
Accuracy	±1% ± 5 counts
Dips and swells Vrms (AC+DC) ³
Measurement range	0.0% … 100% of Vnom
Accuracy	±1% of Vnom
Arms (AC+DC) ³
Measurement range	0 ... 20 kA
Accuracy	±1% ± 5 counts
Harmonics Harmonic (interharmonic) (n)
Measurement range	DC, 1..50; (Off, 1..49) measured relative to fundamental or to total rms
Vrms
Measurement range	0.0 … 1000 V
Accuracy	±5% ± 2 counts
Arms
Measurement range	0.0 … 4000 mV x clamp scaling
Accuracy	±5% ± 5 counts
Watts
Measurement range	Depends on clamp scaling
Accuracy	±5% ± n x 2% or reading, ± 10 counts
DC voltage
Measurement range	0.0 … 1000 V
Accuracy	±5% ± 10 counts
THD
Measurement range	0.0 … 100.0%
Accuracy	±2.5%
Hz
Measurement range	0 … 3500 Hz
Accuracy	± 1 Hz
Phase angle
Measurement range	-360° ... +360°
Accuracy	± n × 1.5°
Power and energy Watt, VA, VAR
Measurement range	1.0 … 20.00 MVA¹
Accuracy	±1.5% ± 10 counts
kWh, kVAh, kVARh
Measurement range	00.00 …200.0 GVAh¹
Accuracy	± 1.5% ± 10 counts
Power Factor/ Cos φ / DPF
Measurement range	0…1
Accuracy	± 0.03
Flicker Pst (1 min), Pst, Plt, PF5
Measurement range	0.00 … 20.00
Accuracy	±5%
Unbalance Volts
Measurement range	0.0 … 5.0%
Accuracy	±0.5%
Current
Measurement range	0.0 … 20%
Accuracy	± 1%
Transient Capture Volts
Measurement range	±6000 V
Accuracy	±2.5% of Vrms
Minimum detect duration	5 μs (200kS/s sampling)
Inrush mode Arms (AC+DC)
Measurement range	0.000 … 20.00 kA¹
Accuracy	±1% of meas ± 5 counts
Autotrend recording Sampling	Up to 100 readings/s continuous sampling per channel
Memory	Up to 3600 min, max and avg points for each reading
Recording time	Up to 450 days
Zoom	Up to 12x horizontal zoom
Memory Screens	Fluke 434 - 50; Fluke 434 - 25
Data sets including recordings	Fluke 434 - 10; Fluke 434 - 5
Notes
¹ Depending on clamp scaling ² 50 Hz/60 Hz nominal frequency according to IEC 61000-4-30 ³ Value is measured over 1 cycle, commencing at a fundamental zero crossing, and refreshed each half-cycle

Enviromental Specifications
Operating temperature	0 °C to +50 °C (32 °F to 122 °F)
Storage temperature	-20 °C to +60 °C (-4 °F to 140 °F)
Operating Altitude	3,000 m (9842 ft)

Safety Specifications
Electrical Safety	EN 61010-1 CAT IV 600 V / CAT III 1000 V
Standards	Measurement methods: IEC61000-4-30 class A; EN50160; IEC 61000-4-15; IEC 61000-4-7

Mechanical & General Specifications
Size	256 x 169 x 64 mm (10 x 6.6 x 2.5 in)
Weight	2 kg (4.4 lb)
Warranty	3 years
Battery life	Rechargeable NiMH pack: >7 hours Charging time: 4 hours typical
Shock & Vibration	MiL-PRF-2880F Class 2
Case	IP51 (dust, drip, waterproof)

Fluke Main Page

Fluke Power Quality Analyzers

Fluke Price List