Fluke 116 Multimeter HVAC Temperature Microamps Specifications Fluke 116

Fluke 116 HVAC Multimeter with Temperature and Microamps

Search:

Fluke 116 HVAC Multimeter with Temperature and Microamps

Product Home | Features | Specifications | Models, Options, Accessories & Discounted Prices

General specifications:

Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.
The accuracy specifications take the form of: ± ( [ % of Reading ] + [ Counts ] )

Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
Display	Digital: 6,000 counts, updates 4/sec
Bar graph	33 segments, updates 32/sec
Operating temperature	-10 °C to + 50 °C
Storage temperature	-40 °C to + 60 °C
Battery	9 volt Alkaline, NEDA 1604A/IEC 6LR61
Battery life	400 hours typical, without backlight

Measurement	Range	Resolution	Accuracy ± ([% of reading] + [counts])
DC millivolts	600.0 mV	0.1 mV	2.0 % + 3
DC volts	6.000 V	0.001 V
	60.00 V	0.01 V
	600.0 V	0.1 V
Auto volts	600.0 V	0.1 V	2.0 % + 3 (dc, 45 Hz to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts¹ true-rms	600.0 mV	0.1 mV	1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
AC volts¹ true-rms	6.000 V	0.001 V	1.0 % + 3 (45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
	60.00 V	0.01 V
	600.0 V	0.1 V
Continuity	600 O	1 O	Beeper on < 20 O off > 250 O; detects opens or shorts of 500 µs or longer.
Ohms	600.0 O	0.1O	0.9 % + 2
	6.000 kO	0.001 kO	0.9 % + 1
	60.00 kO	0.01 kO
	600.0 kO	0.1 kO
	6.000 MO	0.001 MO
	40.00 MO	0.01 MO	1.5 % + 2
Diode test	2.000 V	0.001 V	0.9 % + 2
Capacitance	1000 nF	1 nF	1.9 % + 2
	10.00 µF	0.01 µF
	100.0 µF	0.1 µF
	9999 µF	1 µF
	100 µF to 1000 µF		1.9 % + 2
	> 1000 µF		5 % + 20
Lo-Z capacitance	1 nF to 500 µF		10 % + 2 typical
Temperature² (Type-K thermocouple)	-40 °C to 400 °C	0.1 °C	1 % + 102
Temperature² (Type-K thermocouple)	-40 °F to 752 °F	0.2 °F	1 % + 182
AC µamps true-rms (45 Hz to 500 Hz)	600.0 µA	0.1 µA	1.5 % + 3 (2.5 % + 3 > 500 Hz)
DC µamps	600.0 µA	0.1 µA	1.0 % + 2
Hz (V or A input)³	99.99 Hz	0.01 Hz	0.1 % + 2
	999.9 Hz	0.1 Hz
	9.999 kHz	0.001 kHz
	50.00 kHz	0.01 kHz

¹	All ac voltage ranges are specified from 1 % to 100 % of range. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of = 3 at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled. Auto-V LoZ, and ac mV are dc-coupled.
²	Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
³	Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.

Fluke
Main Page

Fluke
Digital Multimeters

Fluke
Price List

Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740

BBBOnline Reliability Seal, Click for confirmation page.

Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET