|
Extech CA310 300A AC Clamp-on Adaptor (10mV/A Output)
Click image to enlarge
Extech CA310
|
|
Features:
- Banana plugs connect to COM and V sockets of any multimeters for clamp-on current measurements
- 1.2" (30mm) clamp jaw opening (500MCM)
- Measures AC Current and converts it to an AC mV output for displaying Current on any multimeter
- 10mV/A output for use on multimeters with 1mV ACV resolution and with graphical multimeters
- Banana plugs connect into standard multimeter sockets
- 2.5% basic accuracy
- Dimensions: 9.5x3.6x1.7" (24.1x 9.1x4.3mm)
- Weight: 10oz (265g)
- Complete with built-in 10' (3m) cable with banana plugs
- No battery required
|
Description
|
With this clamp adaptor an AC current can be safely measured by simply clamping around a single conductor. The adaptor outputs an AC mV signal that is proportional to the measured AC current. The DMM mV reading (times 10) is equivalent to the value of the AC current. Careful use of this device will provide years of reliable service.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| CA310 |
ADAPTOR, CLAMP-ON 10mV AC/ 1A |
| $39.00 |  |
|
| CA300 |
DISCONTINUED - Discontinued - no replacement |
Specifications
| General Specifications |
| Sensor type |
Induction coil |
| Measurement Range |
0.1 to 300 Amps AC |
| Adaptor Output |
10mV AC output to DMM per 1A AC measurement |
| Frequency range |
50/60Hz |
| Working voltage |
600V CAT II (IEC 1010-1) |
| Maximum output impedance |
45 Ω |
| Accuracy |
± (3.0% + 10mV) for readings less than 50A ± (2.0% + 5mV) for readings greater than 50A |
| Temperature coefficient |
0.2 times the specified accuracy per °C < 18°C or > 28°C |
| Jaw size |
1.2" (30mm) |
| Operating Conditions |
32 to 122°F (0 to 50°C) < 80% RH |
| Dimensions/Weight |
3.2 x 6.1 x 1.4" (80 x 156 x 35mm); 7.8 oz. (220g) |
|
;)
