Live chat by BoldChat
Our agents are available:
9:00 AM - 6:00 PM EST
Ericson Vaporproof, Low Voltage & Hazardous Duty Handlamps
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   



Ericson Vaporproof, Low Voltage & Hazardous Duty Handlamps


Model Description or Specification

70N Series Vaporproof Handlamps

UL Listed & CSA Certified Meets OSHA requirements 1926.403(g), 1926.405(j)(iii) Meets NEC 250-59(a), 420-42(a)(b), 410-44 & 410-49 Molded thermoplastic elastomeric handle impact impervious & jobsite chemical resistant


Hazardous-Duty Handlamps - 2200 Series
  • Class I,Group D, UL Listed and CSA Certified
  • Lightweight construction features non-sparking aluminum guard and non-conductive,high-impact glass reinforced handle
  • Designed for applications requiring weather resistant or spark resistant construction
  • Unique cord restraint seal system includes flex relief and cable cord clamp to provide superior water resistance at cord entry
  • Cable cord clamp can be inspected or adjusted without disassembly of handle
  • Accommodates #14/3 types S,SO, ST or STO cord

Hazardous-Duty Handlamps - 2300 Series
  • UL listed & CSA certified
  • Lightweight construction, non-sparking aluminum guard & non-conductive, high-impact glass reinforced handle
  • Max Wattage 100 Watts

Hazardous-Duty Handlamps - 2400 Series
  • UL listed & CSA certified
  • Lightweight construction, non-sparking aluminum guard & non-conductive, high-impact glass reinforced
  • Max Wattage 13 Watts

Hazardous-Duty Handlamps - 2500 Series
  • UL listed & CSA certified
  • Lightweight construction, non-sparking aluminum guard & non-conductive, high-impact glass reinforced
  • Max Wattage 26 Watts

Low-Voltage
Handlamps:
Incandescent
Series - 1924-12A
UL listed & CSA certified OSHA 1926.405(a)(2)(ii)(G): “Portable electric lighting used in wet and/or other conductive locations, as for example, drums, tanks, and vessels, shall be operated at 12 volts or less. However, 120-volt lights may be used if protected by a GFCI.

Low-Voltage
Handlamps:
Incandescent
Series
- 1922-12A
  • UL listed & CSA certified
  • OSHA 1926.405(a)(2)(ii)(G): “Portable electric lighting used in wet and/or other conductive locations, as for example, drums, tanks, and vessels, shall be operated at 12 volts or less. However, 120-volt lights may be used if protected by a GFCI.

Low-Voltage
Lighting:
Incandescent
Series
- 1924-12A
  • UL listed & CSA certified
  • OSHA 1926.405(a)(2)(ii)(G): “Portable electric lighting used in wet and/or other conductive locations, as for example, drums, tanks, and vessels, shall be operated at 12 volts or less. However, 120-volt lights may be used if protected by a GFCI.

Low-Voltage
Lighting:
Incandescent
Series
- 1926-12A
  • UL listed & CSA certified
  • OSHA 1926.405(a)(2)(ii)(G): “Portable electric lighting used in wet and/or other conductive locations, as for example, drums, tanks, and vessels, shall be operated at 12 volts or less. However, 120-volt lights may be used if protected by a GFCI.

Low-Voltage
Handlamps:
Incandescent
Series - 1915
Series
Ericson High-Intensity Hand Lamps are portable, and have wide application in virtually every industry demanding safe, reliable, and intense illumination. They are ideal for inspecting tanks and boilers: and for service and repair work indoors , outdoors, underground, and in wet or damp locations.

Low Voltage
Transformers
Transformers convert 120VAC/60Hz line voltage to either 12VAC or 6VAC Corrosion resistant enclosures are rated NEMA 4 and made from nonconductive engineering resin so they are resistant to impacts, and jobsite chemicals such as acids, alkalines, oils and salts NEMA 5-15 outlets are rated at 100va each is designed to accommodate a 50 ft. #14/3 SO secondary cord Outlets operate independently of each other Circuit breakers wired individually to each receptacle and operate independently of each other – if one circuit opens the other continues to operate

Single-Tap In-line Low Voltage
Transformers
  • Ideal for when you need only one outlet
  • Converts 120VAC/60Hz to 12VAC (30VA max)
  • Compact size is easy to use, store and transport Complies with
  • OSHA requirement 1926.405(a)(2)(ii)(G)

Extension Lights for Use with Low Voltage Transformers
These lights come with the appropriate low voltage bulb and plug directly into the 1940/1941 Series transformers. Choose either Ericson’s Vapor-Gard lamp or spotlight. As with other Ericson products, we have incorporated our dualcolor safety system on these hand lamps. You receive greater people protection with our startling, brilliant orange and radiant yellow colors that add a new level of safety in usually dull application area.

Emergency Response Lighting Kit
Here is Ericson’s answer to the most urgent need for safe, low-voltage lighting for practically any type of emergency situation. At a moments notice, you have your own customized collection of low-voltage hazardous duty lighting devices ready to go. The oversized, extra-heavy reinforced vinyl bag is designed to carry a large load and to store it securely for its next use. We offer a suggested Standard Emergency Lighting Kit that will meet many needs. Our extensive line of safety lighting equipment makes it easy for you to customize a Kit to suit your particular needs.

13W Fluorescent Handlamp with Battery Pack
These portable work lights are designed to meet the need for safe, temporary, economical task lighting when electricity isn’t available. They are versatile, light-weight and can be used for a wide variety of lighting applications.



   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com
BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET