|
Ericson Panel Mount GFCIs (1075 Series)
Click image to enlarge
|
|
Features:
- UL & cUL listed to UL943 - 2003
- Quick and easy field installation into temporary panels and
workboxes
- Compact & portable, this unit is easy to use, store
and transport
- Works on two or three wire circuits
- Meets OSHA construction site requirements
- Fast response trip time; less than .025 seconds
- Molded polycarbonate enclosure is corrosion and
impact resistant, and stands up to the toughest jobsite conditions
- Manual & automatic power-up models available
- Test and Reset Buttons are clearly marked for easy identification
and each is protected from accidental activation
- High intensity NEON indicator lamp glows bright when power
is on for easy identification of power status
|
Description
-Panel-Mount GFCIs (1075 Series) UL
Listed & CSA Certified 15Amp & 20Amp/120Volt models
-Available
as a manual reset configuration only Panel-Mount GFCIs (1075 Series)
-UL Listed & CSA Certified 15Amp & 20Amp/120Volt models
Available as a manual reset configuration only
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| 1075 |
GFCI Module in dust proof hsg, 120VAC - Discontinued - no replacement |
Ordering Information
Catalog Number |
Type |
Description |
Volts |
Amps |
Watts |
1075-MR |
Manual |
Panel Mount GFCI |
120V |
20A |
2400 |
1075-AR |
Auto |
Panel Mount GFCI |
120V |
20A |
2400 |
Specifications
| Material |
| Enclosure |
UV rated Polycarbonate |
| Electrical |
| Power-up type |
Manual or automated |
| Trip level |
4-6mA |
| Trip time |
less than 25ms (0.025 seconds) |
| Leakage current in 93% relative humidity |
Zero |
| Operating voltage |
120VAC nominal rating (85% to |
| 110% of rated voltage |
102V-132V) |
| Low voltage let go |
40% rated voltage |
| Grounded neutral detection |
2 ohms or less |
| Frequency |
60Hz only |
| Overload current |
120Amps, inductive 50% Power factor, 1 second |
| Radio frequency noise susceptibility |
Operates normally with 0.5 VRMS,10-450Mhz,injected on power lines |
| Voltage surge withstand |
6KV impulse, 0.5 microsecond rise time, 100Khz ringing frequency with 40% decay per cycle |
| Dielectric voltage withstand |
-1500 VRMS between line & load (across contacts)
-2500 VRMS between current carrying conductors and ground conductor
-4000 VRMS between current carrying conductors and enclosure |
| Mechanical |
| Color |
Black Enclosure |
| Power Status Indicator |
Lighted NEON |
| Contact Size |
0.200" dia. |
| Contact Latching |
Electro-mechanical |
| Environmental |
-Operating Temperature Range:-35 °C to +66 °C
-UL94 5V flammability |
| Listings |
| UL & cUL listed |
|
;)
