| MODEL |
OS-9020A |
OS-5040A |
OS-5060A |
| CRT |
Type |
6-inch rectangular screen with internal graticul : 8X10div(1div=1cm) |
| Acceleration Potential |
+1.9 kV approx |
DC-2MHz(-3dB) |
DC-3.5MHz (-3dB) |
| Z-AXIS INPUT (INTENSITY MODULATION) |
Input Signal |
Positive going signal decreases intensity +5Vp-p or more signal cases noticeable modutation at normal intensity settings |
| Bandwith |
DC-2MHz(-3dB) |
DC-2MHz(-3dB) |
DC-3.5MHz(-3dB) |
| Coupling |
DC |
| Input Impedance |
20KW-30KW |
| Maximum input Votage |
30V(DC+peak AC) |
| VERTICAL DEFLECTION |
Bandwith(-3dB) |
DC(10Hz) to 20MHz DC(10Hz) to 7MHz(X5Mag on) |
DC(10Hz) to 40MHz DC(10Hz) to 7MHz(X5Mag on) |
DC(10Hz) to 60MHz DC(10Hz) to 7MHz(X5Mag on) |
| Modes |
CH1, CH2, ADD,DUAL(CHOP:time/div 0.2 to 5ms ALT:time/div 2ms to 0.2$#181;s, to 0.1µs(9060D)) |
| Deflection Factor |
5mV/div to 5V/div 1mV/div (X5Mag on) in 10 calibrated steps of 1-2-5 sequence |
| Accuracy |
±3% (±5% x%Mag on) |
| Input Impedance |
approx. x 1mW in parallel 25pF |
| Maximum Input Voltage |
250V(DC+peak AC) |
| Input Coupling |
CH2 invert |
| Rise Time |
17.5ns or less (50ns or less:x5Mag on) |
8.8ns or less (50ns or less: x5Mag on) |
5.8ns or less (17.5ns or less: x5Mag on) |
| CH1 Out |
20mV/div into 50W:DC to 10MHz(-3dB) |
| Polarity |
CH2 invert |
| Signal Delay Time |
|
delay cable supplied |
| VERTICAL DEFLECTION (CH3 FOR OS-9100D ONLY) |
Deflection Factor |
|
| Bandwith(-3dB) |
|
| Rise time |
|
| Accuracy |
|
| Input Impedance |
|
| Maximum Input Voltage |
|
| HORIZONTAL DEEFLECTION |
Sweep Mode |
A,X-Y |
A,A int B, B, B TRIG'D, X-Y |
| Time Base A |
0.2µ/div to 0.2s/div in 0.1µs/div to 10µs/div in
19 calibrated steps of 1-2-5 sequence 7 calibrated steps of 1-2-5 sequence |
| Hold- off time |
variable with hold-off control |
| Time Base B |
0.2µ/div to 0.2s/div in 0.1µs/div to 10µs/div in
7 calibrated steps of 1-2-5 sequence 7 calibrated steps of 1-2-5 sequence |
| Delay Sweep Position |
1div or less to 10div or more |
| Dealy Time Jitter |
better than 20,000:1 |
| Sweep Magnification |
10 time(Max Sweep Rate:20ns/div) |
10 time (Max Sweep Rate: 10ns/div) |
| Accuracy |
±3%(additional error for magnifier:2%) |
| TRIGGER SYSTEM |
Modes |
Auto, Norm, TV-V, TH-H |
| Source |
CH1, CH2, LINE, EXT |
| Coupling |
AC |
| Slope |
+ or - |
| Sensitivity (Auto, Norm) |
| Frequency |
INT |
EXT |
| 20Hz-2MHz |
0.5div |
0.2Vp-p |
| 2MHz-20MHz |
1.5div |
0.8Vp-p |
|
| Frequency |
INT |
EXT |
| 20Hz-2MHz |
0.5div |
0.2Vp-p |
| 2MHz-40MHz |
1.5div |
0.8Vp-p |
|
| Frequency |
INT |
EXT |
| 20Hz-2MHz |
0.5div |
0.15Vp-p |
| 2MHz-60MHz |
1.5div |
0.3Vp-p |
|
| TV-V,TV-H |
at least 1 div or 1.0Vp-p |
| External Trigger Input Impedance |
1MW in parallel with approx. 30pF |
| Max. Input Voltage |
250V (DC+peak AC) |
| X-Y OPERATION |
Sensitivity |
same as vertical deflection for both, X-axis(CH1) and Y-axis(CH2) |
| X-axis Bandwith |
DC to 500kHz (-3dB) |
| X-Y Phase Difference |
3° or less(at DC to 50kHz) |
| CALIBRATOR |
|
1KHz Square wave, 0.5Vp-p ±3%, duty ratio:50% |
| POWER SUPPLY |
Line Voltage |
100,120,220,240,VAC ±10% |
| Line Frequency |
50/60Hz |
| Power Consumption |
30W |
40W |
50W |
| PHYSICAL CHARACTERISTICS |
Size |
320mm(W)X135mm(H)X320mm(D) |
| Weight |
6.8Kg |
7.2Kg |
7.7Kg |
| OTHERS |
Accessories Supplied |
Operator's manual 1 Spare fuse 2
Power cord1 Probe(option) 2 |
;)
