Click to enlarge Image

Features: Wide frequency range : 0.02Hz to 2MHz Combination of analog and digital oscilloscope performance. Versatile waveforms : Sine, Triangle, Square, Ramp and Pulse sawtooth Low distortion factor less than 1% at 10Hz to 100kHz TTL leveled square wave output Linear sweep control from 1: 1 to 100 : 1 Variable symmetry to generate sawtooth and pulse waveform DC offset control Maximum attenuation of 20dB can be obtained

Model	Description	List Price	Sale Price
FG-8002	2MHz, "SWEEP"	$200.00	$168.00

SPECIFICATIONS	FG-7005C	FG-7002C	FG-8002
FREQUENCY
Output Waveform	Sine, Triangle, Square, Pulse, Sawtooth, Ramp, TTL, CMOS
Frequency Range	0.05Hz-5MHz in the 7 Ranges (1, 10, 100, 1K, 10K, 100K, 1M)	0.02Hz-2MHz in the 7 Ranges (1, 10, 100, 1K, 10K, 100K, 1M)
Frequency Accuracy	± 1 count		± 8% of Full Scale to 2MHz
EXTERNAL FREQUENCY CONTROL (VCF)
Input Voltage	0 to 10V (DC + AC peak)
Frequency Variable Range	100:1 or More
DC Offset	± 10V (Without Load), ± 5V (With Load)
Symmetrical Variable Range	10:1 to 1:10 or More
SINE WAVE
Distortion	Less than 1% (0.2Hz~100kHz)
SQUARE WAVE
Rise/Fall Time	Less than 25ns	Less than 100ns (at Max, output level)
TRIANGLE WAVE
Linearity	Less than 1% to 100kHz, Less than 5% to 2MHz
TTL OUTPUT
Output	TTL level
Rise/Fall Time	Less than 25ns
CMOS OUTPUT
Output	4V~15V ± 1V, Continuously Variable		.
Rise/Fall Time	Less than 40ns (at Max, output level)	Less than 110ns (at Max, output level)	.
SWEEP
Width	1:1 to 100:1
Rate	20ms to 2s (50Hz to 0.5Hz)
Internal Sweep	Linear
External Sweep	By means of VCF input
OUTPUT
Output Voltage	20Vp-p (Open circuit), 10Vp-p (into 50W)
Attenuator	-20dB step and continuously Variable
Impedance	50W ± 5%
FREQUENCY COUNTER
Display	6 digit green LED (0.2Hz ~ 50MHz)		.
Accuracy	±Timebase Error ± 1 count		.
Input Sensitivity	kHz: 100mV, MHz: 300mV		.
Max. Input Voltage	150Vrm (at 1kHz)		.
GENERAL
Operating Environments	0°C ~ 40°C, 85% RH
Ranges for Guaranteed	25°C ±5°C, 70% RH
Power Requirements	AC 115/230V ± 10%, 50/60Hz
Power Consumption	Approx. 20W
Dimensions (mm)	225 (W) X 80 (H) X 260 (D)		210 (W) X 76 (H) X 260 (D)
Accessories	Power Cord, BNC Cable, Fuse, Operators Manual