Dranetz-BMI DFACP3K36 Probe AC Current Flexible 36in 915mm Dranetz-BMI DFACP3K36 DF ACP3K 36 DF-ACP3K-36

Dranetz-BMI DFACP3K36
AC Current 36in (915mm) Flexible Probe

Search:

Dranetz-BMI DFACP3K36
AC Current 36in (915mm) Flexible Probe

Click image to enlarge

DFACP3K36

Data Sheet

User Manual

Features:

UL Listed
BNC connector, with 4mm safety jack included
Available in 24”, 36” and 48” lengths
Smaller diameter core for more flexibility
New snap lock technology
CAT III 1000V, CAT IV 600V Rated
For use with DMM’s, O-scope’s, Power Analyzer’s

Description

The PRO~flex ACP3000_4 are AC current probes utilising Rogowski principle. They can be used to measure AC current up to 3000A, when used with oscilloscopes, recorders or data loggers. The flexible probe allows current measurements on conductors that are hard to reach.

The probes provide a 3V full scale AC output proportional to the current being measured with three selectable ranges.

Models, Options, & Accessories

Model

Description

List Price

Sale Price

DFACP3K36

DranFlex ACP 30/300/3000A/36, BNC/4MM

$415.00

DFACP3K24

DranFlex ACP 30/300/3000A/24, BNC/4MM

$345.00

DFACP3K48

DranFlex ACP 30/300/3000A/48, BNC/4MM

$485.00

DFACP6K24

DranFlex ACP 60/600/6000A/24, BNC/4MM

$450.00

DFACP6K36

DranFlex ACP 60/600/6000A/36, BNC/4MM

$525.00

DFACP6K48

DranFlex ACP 60/600/6000A/48, BNC/4MM

$605.00

Specifications

Measuring ranges	ACP3000_4: 30A / 300A / 3000A AC
Measuring ranges	ACP6000_4: 60A / 600A / 6000A AC
Output sensitivity (AC coupled)	ACP3000_4: 100mV / 10mV / 1mV per A
Output sensitivity (AC coupled)	ACP6000_4: 50mV / 5mV / 0.5mV per A
Accuracy (45-65Hz)	± 1% of reading ± 0.1A: 30/300A or 60/600A ranges
Accuracy (45-65Hz)	± 1% of reading ± 1A: 3000A or 6000A range
Minimum load	100kΩ for specified accuracy
Frequency range	10Hz to 10kHz (-1dB)
Phase (45-65Hz)	>± 1°
Position sensitivity	± 2% of reading
External field	± 0.2% of range with cable >200mm (8") from the probe
Noise	8mV rms in 30A / 60A ranges 2mV rms in 300A / 3000A and 600A / 6000A ranges
Temperature coeff.	± 0.1% /°C
Power supply	Two AA MN1500 LR6 alkaline batteries or an external power supply (+3V/100mA)
Battery life	2000 hours typical
External Power	Via 2.1mm (0.08") mini power connector
Low battery	Indicated by an orange LED
Overload	Indicated by a red LED
Enclosure
Material	ARNITE T06-200SNF, UL94 V0
Degree of Protection	IP40 (not certified by UL)
Dimensions	110 (l) x 65 (w) x 23 (d) mm
Output connection	0.5m coax cable terminated with a safety BNC
Probe
Probe lengths	610mm (24 inches), double insulated 915mm (36 inches), double insulated 1220mm (48 inches), double insulated
Probe diameter	9.9mm (0.39 inches)
Output cable	2m (78.7inches), probe to integrator
Material	Alcryn 2070 NC, LATI LATENE 7H2W V0
Degree of Protection	IP65 (not certified by UL)
General Characteristics
Operating temp.	-20°C to +65°C (-4°F to +149°F)
Storage temp.	-40°C to +75°C (-40°F to +167°F)
Operating humidity	15% to 85% (non-condensing)
Safety standards	EN 61010-1:2001 EN 61010-031:2002 EN 61010-2-032:2002
EMC	EN 61326-2-2:2006
1000 VRMS, Category III, 600 VRMS, Category IV, Pollution Degree 2 (Probe and Integrator)
30V maximum between output and earth
ROHS and WEEE compliant
Rated for continuous use

Dranetz
Main Page

Dranetz
Probes

Dranetz
Price List

Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740

BBBOnline Reliability Seal, Click for confirmation page.

Tequipment.NET
Phone: 1-877-571-7901 / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET