Our agents are available:
9:00 AM - 6:00 PM EST
Compliance West
HT-5000 AC/DC Hi-Pot Tester
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   



Compliance West
HT-5000 AC/DC Hi-Pot Tester



Compliance West HT-5000 Click image to enlarge

  Compliance West
  HT-5000
Features:
  • AC Output to 5000 volts; DC output to 7200 volts delivers up to 20 milliamps. Custom configurations up to 300 mA available..
  • AC/DC selectable. Logic controlled, one button test. LED’s indicate test progress. Upon failure, buzzer sounds and testing is terminated.
  • Leakage current limit, voltage ramp-up time and test duration are controlled from the rear panel. Output voltage adjustable from front and rear.
  • Ground continuity test is defeatable for testing of two wire products.
  • Automatic voltage rampdown circuit eliminates residual voltage.
  • Voltage ramp, shutdown on failure and test timer are defeatable.
  • 1 year warranty.
The HT-5000 is best suited for engineers conducting type testing and product design. Front panel voltage dial-up and AC/DC rocker switch make this unit easy to use. Test termination on failure, voltage ramp time, and the test timer may be disabled for specific research.



Model Description List Price Sale Price
HT-5000 Hipot Tester, 0-5000Vac @ 10mA / 0-7000Vdc @ 5mA
$1595.00 
HT-5000-50mA Hipot Tester, 0-5000Vac @ 50mA / 0-7000Vdc @ 10mA
$2675.00 
HT-5000-50mA-I Hipot Tester, 0-5000Vac @ 50mA / 0-7000Vdc @ 10mA
$3695.00 
HT-5000AC-200mA Hipot Tester, 0-5000Vac @ 200mA
$4795.00 
HT-5000-200mA Hipot Tester, 0-5000Vac @ 200mA / 0-7000Vdc @ 200mA
$11895.00 
Model Accessories List Price Sale Price
TM TestMinder HT
$350.00 
240 220/240V only operation
$145.00 
MT 120/220-240V operation
$225.00 
RI Relay Isolated Remote Interface board
$350.00 
LC Leakage Current Display
$350.00 
VF Voltage Hold on Failure
$200.00 
MHC Manufactured Housing Cordset (2 red, 1 black)
$42.00 
MHC-RV Recreational Vehicle Cordset (2 red, 1 black, small alligator clips)
$40.00 

Click here to download the HT-5000 Data Sheet in PDF format


    Options:


    Specifications:

Electrical
Output: 0-5000 Volts AC and 0-72000 Volts DC. Leakage current 0-10 mA AC; 0-5 mA DC Other configurations available.
Pass/Fail Criteria: Leakage Current: Pass/Fail point user adjustable
Dielectric Breakdown: Separate high frequency detection circuit for breakdown spike detection.
Test Time: User adjustable 1-60 sec.
Voltage Ramp Time: User adjustable .5-5 sec.
Voltage Ramp Down Time: Factory set 8 sec. maximum
Pass/Fail Repeatability: ± 3%
Duty Cycle: 100%
Meter Accuracy: ±3% Full Scale
Test Adjustments: Rear panel: Ramp Time / Test Time / Leakage Limit / Voltage Adjust / Voltage Ramp Defeat / Timer Duration Defeat / Shutdown on Faliure Defeat.


Environmental
Operating Temperature: 15-40°C
Relative Humidity Range: 0-90% non-condensing


General
Input Power Requirements: 114-127 volts, 50/60 Hz
Weight: 17.5 lbs.
Dimensions: 11.250 (W) x 4.250 (H) x 12.000 (L) in.


Safety
Transformer Output: <500 VA
Visual Indication Of Voltage Output: Provided by front panel meter, directly connected to high voltage output.
Failure Indication: Audible, provided by internal buzzer. Visual, provided by red LED’s on front panel. Test automatically terminated on failure.
Leakage Test: Provided; 5mA factory set pass/fail point, user adjustable. 120 KΩ calibration resistor provided on rear panel.



   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com
BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET