Click image to enlarge   Compliance West   HT-3000

Features: AC Output to 2000 volts; delivers up to 20mA, and DC output to 2800 volts; delivers up to 5mA. Logic controlled, one button test. LED’s indicate test progress. Upon failure, buzzer sounds and testing is terminated. Output voltage, leakage current limit, voltage ramp-up time and test duration are controlled from the rear panel. Ground continuity test is defeatable for testing of two wire products. Two high voltage output connections; NEMA 5-15R receptacle and a high voltage test jack. Automatic voltage rampdown circuit eliminates residual voltage. Performs to UL, CE, IEC, CSA, TUV safety agency requirements for production line testing. 1 year warranty.

The HT-3000 is suitable for component testing as well as testing of finished products. This unit contains all the features of both the HT-2000 and HT-2800 with an AC/DC rocker switch on front panel. This unit performs the production line tests required by UL, CSA and CE. Provided with leads, manual and calibration certificate.

Model	Description	List Price	Sale Price
HT-3000	Hipot Tester, 0-2000Vac @ 20mA/ 0-2800Vdc @ 5mA		$1495.00
HT-3000AC-1A	Hipot Tester, 0-3000Vac @ 1A		$5795.00
HT-3000DC-500mA	Hipot Tester, 0-3000Vac output @ 500mA		$5495.00
Model	Accessories	List Price	Sale Price
TM	TestMinder HT		$350.00
TL	TestLink for GF and HT test combination		$100.00
240	220/240V only operation		$145.00
MT	120/220-240V operation		$225.00
AR	Auto Reset on Pass		$100.00
RI	Relay Isolated Remote Interface board		$350.00
LC	Leakage Current Display		$350.00
LI	Line Current Measurement		$350.00
LR	Line Resistance Measurement		Call
AH	2500Vac 20mA and/or 3400Vdc 5mA output		$145.00
DH	3500Vdc 5mA output		$145.00
LLC	Low Leakage Current Trip (10uA min)		$100.00
VF	Voltage Hold on Failure		$200.00
XI	External Interlock		$360.00
HVP	High Voltage Probe (up to 10kV)		$150.00
SV	Safe Voltage Relay Output		$200.00
MHC	Manufactured Housing Cordset (2 red, 1 black)		$42.00
MHC-RV	Recreational Vehicle Cordset (2 red, 1 black, small alligator clips)		$40.00

TEST-LINK upgrade TEST-MINDER automation software HTT-1 Hipot Operation Checker Custom Configurations High Voltage Probe

Electrical
Output:	0-2000 Volts AC and 0-2800 Volts DC. Pigtail and Receptacle adapters available for most configurations. Consult factory.
Leakage Current:	0-20 mA AC; 0-5 mA DC
Pass/Fail Criteria:	Ground Continuity: 3Ω ±5% * (defeatable) Leakage Current: Pass/Fail point user adjustable. Dielectric Breakdown: Separate high frequency detection circuit for breakdown spike detection.
Test Time:	User adjustable 1-60 sec.
Voltage Ramp Time:	User adjustable .5-5 sec.
Voltage Ramp Down Time:	Factory set 1 sec. approx.
Pass/Fail Repeatability:	± 3%
Duty Cycle:	100%
Meter Accuracy:	±3% Full Scale
Test Adjustments:	Rear Panel: Ramp Time, Test Time, Leakage Limit, Voltage Adjust. Tamper-proof operation available by removing adjustment shafts.

Environmental
Operating Temperature:	15-40°C
Relative Humidity Range:	0-90% non-condensing

General
Input Power Requirements:	114-127 volts, 50/60 Hz
Weight:	10.5 lbs.
Dimensions:	9.250 (W) x 4.250 (H) x 10.000 (L) in.

Safety
Transformer Output:	<500 VA
Visual Indication Of Voltage Output:	Provided by front panel meter, directly connected to high voltage output.
Failure Indication:	Audible, provided by internal buzzer. Visual, provided by red LED’s on front panel. Test automatically terminated on failure.
Ground Test:	Provided; 3 ohm pass/fail point. May be defeated for testing of products with two wire power supply cords.
Leakage Test:	Provided; 5mA AC/1 mA DC factory set pass/fail point, user adjustable. 120 KΩ calibration resistor provided on rear panel.
Operation Instructions:	Provided on rear panel.