|
Compliance West HT-2800 DC Hi-Pot Tester
Click image to enlarge
|
Features:
- DC Output to 2800 volts; delivers up to 5mA
- Logic controlled, one button test. LEDs indicate test progress. Upon failure, buzzer sounds and testing is terminated.
- Output voltage, leakage current limit, voltage ramp-up time and test duration are controlled from the rear panel.
- Ground continuity test is defeatable for testing of two wire products.
- Nema 5-15R receptacle provided on front panel for high voltage output.
- Automatic voltage rampdown circuit eliminates residual voltage.
- Performs to UL, CE, IEC, CSA, TUV safety agency requirements for production line testing.
- 1 year warranty.
|
| The HT-2800 is ideal for general purpose production-line testing of computer, telephone or other ITE equipment containing capacitive filtering networks in the primary. This unit performs all the production line tests required by UL CSA and CE. |
| Model |
Description |
List Price |
Sale Price |
| HT-2800 |
Hipot Tester, 0-2800Vdc @ 5 mA |
| $1095.00 |  |
|
| Model |
Accessories |
List Price |
Sale Price |
| TM |
TestMinder HT |
| $350.00 |  |
|
| TL |
TestLink for GF and HT test combination |
| $100.00 |  |
|
| 240 |
220/240V only operation |
| $145.00 |  |
|
| MT |
120/220-240V operation |
| $225.00 |  |
|
| AR |
Auto Reset on Pass |
| $100.00 |  |
|
| RI |
Relay Isolated Remote Interface board |
| $350.00 |  |
|
| LC |
Leakage Current Display |
| $350.00 |  |
|
| LI |
Line Current Measurement |
| $350.00 |  |
|
| LR |
Line Resistance Measurement |
| Call |  |
|
| DH |
3500Vdc 5mA output |
| $145.00 |  |
|
| LLC |
Low Leakage Current Trip (10uA min) |
| $100.00 |  |
|
| HO |
Front Panel High Voltage Receptacle and Lead |
| $50.00 |  |
|
| MHC |
Manufactured Housing Cordset (2 red, 1 black) |
| $42.00 |  |
|
| MHC-RV |
Recreational Vehicle Cordset (2 red, 1 black, small alligator clips) |
| $40.00 |  |
|
Click here to download the HT-2800 Data Sheet in PDF format
| Electrical |
| Output: |
0-2800 Volts DC into NEMA 5-15R Receptacle. Pigtail and Receptacle adapters available for most configurations. Consult factory. |
| Leakage Current: |
0-5 mA |
| Pass/Fail Criteria: |
Ground Continuity: 3Ω ±5% * (defeatable)
Leakage Current: User adjustable 1-5 mA
Dielectric Breakdown: Separate high frequency detection circuit for breakdown spike detection. |
| Test Time: |
User adjustable 1-60 sec. |
| Voltage Ramp Time: |
User adjustable .5-5 sec. |
| Pass/Fail Repeatability: |
± 3% |
| Duty Cycle: |
100% |
| Meter Accuracy: |
±3% Full Scale |
| Discharge Time: |
Voltage dependent; discharge progress displayed on front panel meter. |
| Test Adjustments: |
Tamper-proof operation available. |
| Environmental |
| Operating Temperature: |
15-40°C |
| Relative Humidity Range: |
0-90% non-condensing |
| General |
| Input Power Requirements: |
114-127 volts, 50/60 Hz |
| Weight: |
10.5 lbs. |
| Dimensions: |
9.250 (W) x 4.250 (H) x 10.000 (L) in. |
| Safety |
| Transformer Output: |
<500 VA |
| Visual Indication Of Voltage Output: |
Provided by front panel meter, directly connected to high voltage output. |
| Failure Indication: |
Audible, provided by internal buzzer. Visual, provided by red LEDs on front panel. Test automatically terminated on failure. |
| Continuity Test: |
Provided; 3 ohm pass/fail point. May be defeated for testing of products with two wire power supply cords. |
| Leakage Test: |
Provided; 2mA factory set pass/fail point, user adjustable. 120 KΩ calibration resistor provided on rear panel. |
| Operation Instructions: |
Provided on rear panel. |
|