|
Compliance West
HT-20000AC AC Hi-Pot Tester
Click image to enlarge
Compliance West
HT-20000AC
|
Features:
- AC output to 20Kv. Delivers up to 10 mA leakage current. Custom outputs available to 25mA.
- Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates. Test termination defeatable by switch on rear panel. Provided with arc detection circuit to properly detect hipot failures.
- Rear panel adjustments: leakage limit, ramp time, test time and voltage.
- Automatic voltage ramp-down circuit eliminates residual voltage.
- Designed for product development and laboratory use.
- High voltage test jack output.
- Calibrated to NIST standards.
- 1 year warranty
|
|
The HT-20000 is available for very high voltage dielectric withstand testing, in either an AC Voltage or DC Voltage output design. The front panel voltage dial-up makes this unit easy to use. As with our HT-5000, test termination on failure, voltage ramp time, and the test timer may be disabled for specific research. Provided with leads, manual, and calibration certificate.
|
| Model |
Description |
List Price |
Sale Price |
| HT-20kVac |
Hipot Tester, 0-20kV @ 8mA to 15kV, derated 1.2mA/kv above - Discontinued - no replacement |
| HT-20kVac-25mA |
Hipot Tester, 0-20kV @ 25mA - Discontinued - no replacement |
| Model |
Accessories |
List Price |
Sale Price |
| VF |
Voltage Hold on Failure |
| $200.00 |  |
|
| 240 |
220/240V only operation |
| $145.00 | |
|
| MT |
120/220-240V operation |
| $225.00 | |
|
| RI |
Relay Isolated Remote Interface board |
| $350.00 | |
|
| MHC |
Manufactured Housing Cordset (2 red, 1 black) |
| $42.00 | |
|
| MHC-RV |
Recreational Vehicle Cordset (2 red, 1 black, small alligator clips) |
| $40.00 | |
|
Options:
Specifications:
|
Electrical
|
|
Output:
|
0-20000 Volts AC, Leakage Current: 0-8 mA to 15 kVAC, derated 1.2 ma/kV to 20 kVAC
|
|
Pass/Fail Criteria:
|
Leakage Current: Pass/Fail point user adjustable.
Dielectric Breakdown: Separate high frequency detection circuit for breakdown spike detection
|
|
Test Time:
|
User adjustable 1-60 sec., defeatable.
|
|
Voltage Ramp Up Time:
|
User adjustable 1-5 sec., defeatable
|
|
Voltage Ramp Down Time:
|
Factory set 8 sec. maximum
|
|
Pass/Fail Repeatability:
|
± 3%
|
|
Duty Cycle:
|
100%
|
|
Test Adjustments:
|
Front panel: Ramp Time, Test Time, Leakage Limit, Voltage Adjust, Voltage Ramp ON/DEFEAT, Timer Duration ON/DEFEAT, Failure Shutdown ON/DEFEAT
|
|
Environmental
|
|
Operating Temperature:
|
15-40°
|
|
Relative Humidity Range:
|
0-90%, non-condensing
|
|
General
|
|
Input power requirements:
|
114-127 volts, 50/60 Hz
|
|
Weight:
|
32 lbs.
|
|
RESET and TEST Lamp Type:
|
Replace with type 73 14V lamp.
|
|
Safety Agency Topics
|
|
Transformer Output:
|
< 500VA
|
|
Visual Indication of Voltage Output Provided by front panel meter, directly connected to high voltage output
|
|
Failure Indication:
|
Audible, provided by internal buzzer
Visual, provided by red LEDs on front panel
Test can be automatically terminated on failure
|
|
Leakage Test:
|
Provided; 5 mA AC factory set pass/fail point, user adjustable.
|
|
;)