|
Compliance West ATS-2000
Multichannel AC/DC Hi-Pot Tester
Click image to enlarge
Compliance West
ATS-2000
|
Features:
- Multiple Test Points - Capable of testing up to 2000 test points at speeds of up to 10ms per point.
- High Voltage Hipot / Isolation Tests - Adjustable output voltages available in ranges from: 0-500 VDC; 0-1000VDC; 0-250 VAC/VDC; 0-1000VAC/0-1500 VDC; 0-3000VAC/0-5000VDC.
- Continuity Tests - Test current of 10mA (typical) with user-programmable high- and low-resistance PASS/FAIL set points. Custom test currents available; please consult factory.
- User Friendly Software - Simple windows-based software allows users to configure, label and save test set-ups in any combination of continuity and/or Hipot tests. The system also has a self-learn feature that easily sets up tests from a sample assembly. The data collection software immediately identifies failure location(s) simplifying the trouble shooting process. The software also allows you save and print information such as test results, failure location, customer, operator and date.
|
The ATS-2000: The most advanced and most flexible Hipot and continuity test system available. Cable harnesses, printed circuit boards, connectors, transformers and multi-phase motors are just a few of the products quickly and easily tested.
Available with up to four configurable voltage and current test sources, sourcing up to 3.5Kv AC/5Kv DC, the system can perform Hipot, Continuity, Leakage Current, Insulation Resistance tests and 0-500ohm resistance measurements between any two points in a circuit, with up to 2000 points defined in each test setup.
The easy to use, windows-based software program allows the user to configure, label and save test set-ups in any combination of continuity and/or Hipot tests. The data collection software immediately identifies failure location(s) simplifying the trouble shooting process. The software also allows you to save and print information such as test results, failure location, customer, operator and date. Our proprietary MapNet program is a "Self-learn" algorithm that easily determines test parameters from a known-good sample assembly, saving considerable programming time.
The ATS-2000 is designed to provide maximum flexibility. The system can be configured with as few as 8 test points or as many as 2000. You can expand the system at any time by simply adding relay cards as your requirements change.
|
| Model |
Description |
List Price |
Sale Price |
| ATS-2000 |
Please call or email us for pricing and availability. |
 Click here to download the ATS-2000 Data Sheet in PDF format
Specifications:
|
Dielectric Withstand Test
|
|
Output (model dependent):
|
0-500 VDC; 0-1000 VDC; 0-250 VAC/VDC; 0-1000 VAC/0-1500VDC
0-3000 VAC/0-5000 VDC. Adjustable in 10 volt steps.
|
|
Leakage Current Limit:
|
20mA max on AC models; 5mA max on DC models (Actual current limits are model dependant. Consult factory for standards configurations.)
|
|
Test Time:
|
Adjustable from 10ms to 130 seconds.
|
|
Voltage Ramp Time:
|
Adjustable from 0-5 seconds
|
|
Continuity Test
|
|
Voltage:
|
Less than 8 Volts, 10mA test current (typical)
|
|
Resistance:
|
Adjustable scale and PASS/FAIL thresholds, 3% or better accuracy (typical)
|
|
Environmental
|
|
Operating Temperature:
|
15-40°C
|
|
Relative Humidity Range:
|
0-90% non-condensing
|
|
General
|
|
Input Power Requirements:
|
114-127 volts, 50/60 Hz
|
|
Dimensions:
|
Standard rack mount chassis: 19”(W) x 5.25”(H) x 15”(L)
|
|
Available Relay Boards
|
8-Channel, 2 form C mechanical relays, rated 1000VAC/1500VDC
8-Channel, 1 form A mechanical relays, rated 3000VAC/5000VDC
16-Channel, 1 form C mechanical relays, rated 250VAC/300VDC
32-Channel, Solid State relays, rated 1000VDC
Additional configuations are available. Please contact the factory for details.
|
|
;)