|
Compliance West 10x1000s-2-2
MegaPulse Impulse Tester
Click image to enlarge
Compliance West
10x1000s-2-2
|
Features:
- Generates the waveforms required by GR-1089, Issue 1, 2 or 3 in accordance with the referenced Table or Paragraph.
- Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse within the 968 Series, allowing easy sanity checks and proof to visiting agency engineers of test setups.
- 1000:1 BNC Oscilloscope output allows quick connections and easy evaluation of output waveforms.
- Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
- Additional outputs for four-wire testing, as needed, up to four.
- 1 year warranty
|
Peak output voltage is adjustable up to 2000 volts minimum, peak short circuit current is 200A minimum. A switch is provided for reversal of output polarity. Optional divider network available for oscilloscope connection.
Waveform generated is 10x1000x10/1000, Vp= 2000V. To perform the test, the front panel voltage meter is set to the voltage as determined by the test suite described in Paragraph 4.6.7.1, Protection Coordination. The 10Ω output tap is used for this test.
Two output taps are provided, one with Zout=6Ω and one with Zout=10Ω, to allow performance of Surge Tests in Issue 3, Paragraphs 4-2, 4-11, and 4-15.
Enclosure is 19 x 3U, rack mountable (not as shown).
Outputs are isolated.
The MegaPulse 10x1000s-2 ships with cables, graphs of theoretical and actual waveforms, and a Calibration Certificate. One year warranty. Options include relay outputs for PLC control, and two 1000:1 oscilloscope BNC jacks (differential mode only).
This tester can be configured with one, two, three or four outputs for testing in accordance with Table 4-1 Test Condition B.
|
| Model |
Description |
List Price |
Sale Price |
| 10x1000s-2-2 |
2000V peak, symmetrical voltage and current output, two ch. |
| $12180.00 |  |
|
| Model |
Accessories |
List Price |
Sale Price |
| MT |
120/220-240V operation |
| $225.00 | |
|
| BNCV |
Voltage BNC for MegaPulse option (grounded output testers only) |
| $200.00 | |
|
| BNCI |
Current BNC MegaPulse option |
| $200.00 | |
|
| RI |
Relay Isolated Remote Interface board |
| $350.00 | |
|
| FC |
Fast Charge Power Supply (contact factory) |
| $430.00 | |
|
| TMM |
TestMinder MegaPulse w/repetitive pulse capability |
| $1250.00 | |
|
| IFD |
MegaPulse Insulation Fault Detector, Adjustable trip |
| $860.00 | |
|
Options:
Specifications:
|
Specifications
|
|
Voltage Rise Time:
|
10 μs
|
|
Voltage Duration:
|
1000 μs |
|
Current Rise Time:
|
10 μs
|
|
Current Duration:
|
1000 μs
|
|
Max Voltage:
|
2000V
|
|
Meter Accuracy:
|
±120V
Better than 1% of full-scale reading
|
|
Operating Temperature:
|
15-40°C
|
|
Relative Humidity Range:
|
0-90% Non-Condensing
|
|
Input Power Requirements:
|
120 V AC, 50/60 Hz, 1 Amp
230 V optional; check with factory
|
|
Dimensions:
|
11.250 (W) x 12.000 (D) x 5.000 (H) in.
|
|
Weight:
|
16 lbs.
|
|
;)
