|
Compliance West 1.2x50/8x20-7-1
MegaPulse Impulse Tester
Click image to enlarge
Compliance West
1.2x50/8x20-7-1
|
Features:
- Generates the waveforms required by GR-1089, Issue 1, 2 or 3 in accordance with the referenced Table or Paragraph.
- Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse within the 968 Series, allowing easy sanity checks and proof to visiting agency engineers of test setups.
- 1000:1 BNC Oscilloscope output allows quick connections and easy evaluation of output waveforms.
- Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
- Additional outputs for four-wire testing, as needed, up to four.
- 1 year warranty
|
Peak output voltage is adjustable up to 7000 volts minimum, peak short circuit current is 3000A minimum. A switch is provided for reversal of output polarity. Optional divider network available for oscilloscope connection.
Waveform generated is 1.2x50/8x20, Vp= 7000V. To perform the Test, the front panel voltage meter is set to 6000V, or other value specified in Note 4.
Enclosure is 19 x 3U, rack mountable (not as shown).
Outputs are isolated.
The MegaPulse 1.2x50/8x20-7 ships with cables, graphs of theoretical and actual waveforms, and a Calibration Certificate. One year warranty. Options include relay outputs for PLC control, and two 1000:1 oscilloscope BNC jacks (differential mode only).
|
| Model |
Description |
List Price |
Sale Price |
| 1.2x50/8x20-7-1 |
7000V peak, combination wave, signel channel |
| $5895.00 |  |
|
| Model |
Accessories |
List Price |
Sale Price |
| MT |
120/220-240V operation |
| $225.00 | |
|
| BNCV |
Voltage BNC for MegaPulse option (grounded output testers only) |
| $200.00 | |
|
| BNCI |
Current BNC MegaPulse option |
| $200.00 | |
|
| RI |
Relay Isolated Remote Interface board |
| $350.00 | |
|
| FC |
Fast Charge Power Supply (contact factory) |
| $430.00 | |
|
| TMM |
TestMinder MegaPulse w/repetitive pulse capability |
| $1250.00 | |
|
| IFD |
MegaPulse Insulation Fault Detector, Adjustable trip |
| $860.00 | |
|
Options:
Specifications:
|
Specifications
|
|
Voltage Rise Time:
|
1.2 μs
|
|
Voltage Duration:
|
50 μs |
|
Current Rise Time:
|
8 μs
|
|
Current Duration:
|
20 μs
|
|
Max Voltage:
|
7000V
|
|
Meter Accuracy:
|
±140V
Better than 1% of full-scale reading
|
|
Operating Temperature:
|
15-40°C
|
|
Relative Humidity Range:
|
0-90% Non-Condensing
|
|
Input Power Requirements:
|
120 V AC, 50/60 Hz, 1 Amp
230 V optional; check with factory
|
|
Dimensions:
|
11.250 (W) x 12.000 (D) x 5.000 (H) in.
|
|
Weight:
|
16 lbs.
|
|
;)
