|
Bacharach Software Downloads
|
HGM300
| Software Version |
Notes: |
| v1.0 (150k) (.exe) |
Use with HGM300 units with v1.0 Unit Firmware, which were built June 2001 or before (as indicated by a serial number that starts with AF01 or lower). |
| v1.52 (95K) (.zip) |
Use with HGM300 units with v1.21 Unit Firmware or above, which were built August 2001 or later (as indicated by a serial number that starts with AH01 or above). The Firmware version is also indicated on the label on the ROM module inside the HGM300.
Unzip the downloaded file onto your hard drive or floppy. Start the program by double clicking the filename PC2HGM.EXE. |
|
back to top
|
AGM300
| Software Version |
Notes: |
| v1.52 (95k) (.zip) |
Use with AGM300 units. Unzip the downloaded file onto your hard drive or floppy. Start the program by double clicking the filename PC2AGM.EXE. |
|
back to top
|
H25-IR
| Software Version |
Notes: |
| v2.45 (1560 KB) (.zip) |
Use with H25-IR units. Flash Memory Utility Unzip downloaded files into a separate directory on your hard drive. Instructions on how to use this utility is included in the zip file.
This utility is used to flash the memory of the H25-IR with the appropriate firmware image file. |
| Firmware Version |
Notes: |
| v1.25 (125 KB) (.bin) |
Use with H25-IR units. Firmware Image File Copy the firmware’s image BIN file into the same directory that contains the H25-IR Flash Memory Utility. Instructions on how to flash memory is contained in the H25-IR Flash Memory Utility zip file. |
|
back to top
|
BACH-COM Data Download Software
| Software Version |
Notes: |
| v2.34 (5.6 MB) (.zip) |
Use with CO2 Monitor 2810, 2815 & 2820, StowSeek, N2O Monitor 3010, MGC 100 units. Unzip downloaded file into a separate directory on your hard drive, and then run "setup.exe" to install. |
|
back to top
|
BACH-COM Plus Data Download Software
| Software Version |
Notes: |
| v1.01 (4.6 MB) (.zip) |
Use with CO2 Analyzer 2825, 2830 & 2835, Comfort Check 100 & 200, MGC 200 units. Unzip downloaded file into a separate directory on your hard drive, and then run "setup.exe" to install. |
|
back to top
|
