| Output Specification |
| Power |
1.2KW |
| Output Voltage |
0 - 40V |
| Output Current |
0 - 30A |
Ripple rms. (10HZ to 1MHz)
Noise (10Hz to 20MHz) |
<10mV
<45mVpp |
| Programming Resolution (Digital Interface), LSB (not LED displays) |
| Voltage |
10mV |
| Current |
10mA |
| Output Programming Accuracy (Analog Programming 0 To 5v & 0 To 10) |
| Voltage |
0.5% of F.S. ± 1 Digit (spec. for all VSP models) |
| Current |
0.5% of F.S. ± 1 Digit (spec. for all VSP models) |
| Meter Accuracy |
| Voltage |
+/- 0.2% of F.S. +/- 3 Digit (spec. for all VSP models) |
| Current |
+/- 0.2% of F.S. +/- 3 Digit (spec. for all VSP models) |
| Regulation |
| CV Line Regulation |
0.2% of F.S. (spec. for all VSP models) |
| CC Line Regulation |
0.2% of F.S. (spec. for all VSP models) |
| CV Load Regulation |
0.2% of F.S. (spec. for all VSP models) |
| CC Load Regulation |
0.2% of F.S. (spec. for all VSP models) |
| Output Specification |
| Stability |
0.05% |
| Efficiency |
80% Minimum |
| Transient Response |
250 microseconds for load change from 40% to 90% |
| Mode Of Operation |
| Local Mode |
Through front panel potentiometer for voltage, current and over voltage and Push switch for Output ON/ OFF control |
| Remote Mode |
Interface Analog programming of voltage and current |
| Voltage |
0 - 5 volts or 0 - 10 volts for output voltage and current, selection through DIP-switch |
| Resistance |
0 - 4.85k from 0 to full-scale level |
| Digital Interface |
RS-232 / GPIB |
| Protections |
| Over voltage protection |
Programmable through POT in local mode and through digital interface in remote mode |
| Over temperature protection |
Through 90°C. Thermal switch on heat sink |
| Input specifications |
| Mains Input Range |
95Vac to 264Vac |
| Input Frequency |
47 To 63 Hz |
| Input Power Factor |
0.99 On Full Load At Nominal Input |
| Inrush Current |
Limited By NTC |
| Operating Environment |
| Temperature |
0 - 50°C |
| Relative Humidity |
< 80% rh - non condensing |
| Storage Temperature |
-20°C to +70°C |
| Warm-up Time |
15 minutes |
| Safety Standards |
| EMI Filtering |
EN55022 Class-A |
| Safety Class |
EN60950 |
| Mechanical Specifications |
| Weight (approx.) |
13.7lbs. (6.2 KG.) |
| Dimensions (WxHxD) |
19 x 1.75 x 18" (483 x 44.5 x 457mm) |
| Dimensions with rubber feet |
19 x 2.13 x 20" (483 x 54 x 457mm) |
| Accessories |
| Warranty |
One Year Warranty |
| Supplied |
Instruction Manual |
| Optional (for all models) |
TL-5, TL-30 |
| * = Specification also apply to corresponding GPIB model (Add GPIB to the model number for a GPIB interface instead of a RS232 interface. Example: VSP6020GPIB) |
| F.S. = Full Scale. Full scale will be different for each model. Example: If you have a VSP2050 and you are measuring the voltage meter accuracy, the meter can not off more than 0.3V (20V + 0.2% + 3 digit). Note: 3 digits refers to the power supply displays least significant digit |
;)
