Dual display simultaneously displays value and deviation from selected tolerance
Selectable count resolutions of 120,000, 40,000 and 4,000 count
Selectable 2 wire and 4 wire resistance measurements
Measure frequency to 1MHz with 0.01Hz best resolution
GPIB and RS-232 interface
Description
The Dual Display Multimeter model 5492 is a 5 1/2 digit multimeters with selectable count resolutions up to 120,000 count and GPIB interface. It is designed for bench-top, field service, and system applications with a high performance to price ratio.
4 Wire Test Leads with Kelvin Clips - Discontinued - no replacement
RK 01
Rack Mount Kit for single 5491A/5492
$51.00
TH 02
Insulation Piercing Clip
$50.96
TL 35
Red & Black Test Leads
$30.16
Specifications
DC Voltage
Maximum Range
1000V
Best Accuracy
0.012% + 5 dgts.*
Best Resolution
10mV*
AC Voltage (True RMS) Freq. 50Hz to 5KHz
Maximum Range
750V
Best Accuracy
1% + 40 dgts.*
Best Resolution
10mV*
DBm (600W Ref.)
Range
-31 to 59*
Resolution
0.01dB
Best Accuracy
0.8dB*
DC Current
Maximum Range
12A
Best Accuracy
0.1 + 3 dgts.*
Best Resolution
1mA*
AC Current (True RMS, AC Coupled) Freq. 50Hz to 2KHz
Maximum Range
12A
Best Accuracy
0.5 + 12 dgts.*
Best Resolution
1mA*
Resistance
Maximum Range
300MW
Best Accuracy
0.06 + 3 dgts.*
Best Resolution
10mW*
Frequency
Maximum Range
120KHz
Best Accuracy
0.005 + 2 dgts
Best Resolution
10mHz
* = Medium Measurement Rate
General Items
Warm up time
At least 30 minutes
Temperature Coefficient
Add 0.15 x (the applicable accuracy)/°C at 0°C to 18°C and 28°C to 50°C
Operating Temperature
0°C to 50°C (32°F to 122°F)
Storage Temperature
-20°C to 60°C
Altitude
Up to 2000 M
Pollution Degree
II
Over-voltage Category
CAT II-600V and CAT I-1000V
Relative Humidity
Up to 80% for 0°C to 28°C (75% RH for 12M Ohm and above ranges of resistance measurement) Up to 70%for 28°C to 35°C Up to 50%for 35°C to 50°C
Common Mode Voltage
1000V dc or peak ac rms maximum between any input and earth ground
Dimension
Approx. 255(w) x 105(h) x 305(d) mm (with holsters)
Weight
<3.0kgs
Line Voltage
100V / 120V / 220V / 240V ac ±10%, 50/60Hz, 16VA maximum
Interface
RS-232 (DB-9, male connector) Baud rates: 9600, 4800, 2400, 1200, 600, 300 Data length: 7 or 8 bits Parity: even / odd / none Stop bit: 1 or 2 bits Echo: on / off Print mode: on / off
Safety Requirement
Designed in compliance with EN61010-1 (IEC1010-1)
Installation Category
CAT-I 750VAC/1000VDC or CAT-II 600V,Pollution Degree 2 Environment
;)
