Our agents are available:
9:00 AM - 6:00 PM EST
BK 5492 Bench Multimeter 5 1/2 Digit Dual Display Bench DMM with 0.012% Basic Accy
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   

   
   

BK 5492 Bench Multimeter 5 1/2 Digit Dual Display Bench DMM with 0.012% Basic Accy


BK 5492
Click image to enlarge

 BK 5492

Features:
  • Selectable count resolutions of 120,000, 40,000 and 4,000 count
  • Selectable 2 wire and 4 wire resistance measurements
  • Measure frequency to 1MHz with 0.01Hz best resolution
  • RS-232 interface
  • GPIB option available (order model 5492GPIB)


  Description

The Dual Display Multimeter model 5492 is a 5 1/2 digit multimeters with selectable count resolutions up to 120,000 count. It is designed for bench-top, field service, and system applications with a high performance to price ratio. One set of TL 36 Test Leads and AC 01 caps for TL 36 are included with each 5492.


  Models, Options, & Accessories


Model Description List Price Sale Price
5492 5 1/2 Digit Dual Display Bench DMM with 0.012% Basic Accy $715.00
$643.50 
5492GPIB Model 5492 with GPIB Card Installed $849.00
$764.10 
Model Accessories List Price Sale Price
AC 02 Lantern Tip Extension Probe for TL 35
$9.99 
AC 03 Red & Black Alligator Clips
$10.39 
AK 5491 Software and RS-232 cable for 5491A & 5492
$102.00 
KC 01 4 Wire Test Leads with Kelvin Clips
$154.96 
RK 01 Rack Mount Kit for single 5491A/5492
$50.96 
TH 02 Insulation Piercing Clip
$50.96 
TL 35 Red & Black Test Leads
$30.16 


  Specifications

DC Voltage
Maximum Range 1000V
Best Accuracy 0.012% + 5 dgts.*
Best Resolution 10mV*
AC Voltage (True RMS) Freq. 50Hz to 5KHz
Maximum Range 750V
Best Accuracy 1% + 40 dgts.*
Best Resolution 10mV*
DBm (600W Ref.)
Range -31 to 59*
Resolution 0.01dB
Best Accuracy 0.8dB*
DC Current
Maximum Range 12A
Best Accuracy 0.1 + 3 dgts.*
Best Resolution 1mA*
AC Current (True RMS, AC Coupled) Freq. 50Hz to 2KHz
Maximum Range 12A
Best Accuracy 0.5 + 12 dgts.*
Best Resolution 1mA*
Resistance
Maximum Range 300MW
Best Accuracy 0.06 + 3 dgts.*
Best Resolution 10mW*
Frequency
Maximum Range 120KHz
Best Accuracy 0.005 + 2 dgts
Best Resolution 10mHz
* = Medium Measurement Rate
General Items
Warm up time At least 30 minutes
Temperature Coefficient Add 0.15 x (the applicable accuracy)/°C at 0°C to 18°C and 28°C to 50°C
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 60°C
Altitude Up to 2000 M
Pollution Degree II
Over-voltage Category CAT II-600V and CAT I-1000V
Relative Humidity Up to 80% for 0°C to 28°C (75% RH for 12M Ohm and above ranges of resistance measurement)
Up to 70%for 28°C to 35°C
Up to 50%for 35°C to 50°C
Common Mode Voltage 1000V dc or peak ac rms maximum between any input and earth ground
Dimension Approx. 255(w) x 105(h) x 305(d) mm (with holsters)
Weight <3.0kgs
Line Voltage 100V / 120V / 220V / 240V ac ±10%, 50/60Hz, 16VA maximum
Interface RS-232 (DB-9, male connector)
Baud rates: 9600, 4800, 2400, 1200, 600, 300
Data length: 7 or 8 bits
Parity: even / odd / none
Stop bit: 1 or 2 bits
Echo: on / off
Print mode: on / off
Safety Requirement Designed in compliance with EN61010-1 (IEC1010-1)
Installation Category CAT-I 750VAC/1000VDC or CAT-II 600V,Pollution Degree 2 Environment
EMC Requirement Designed in compliance with EN61326-1


   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com 		BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET