company logo BK 5491A 50,000 Count Digit
Dual Display Bench Multimeter
     Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.  
 

 
 




BK 5491A 50,000 Count Digit
Dual Display Bench Multimeter



BK 5491A
Click image to enlarge

 BK 5491A

Datasheet
Manual



Additional Images:


5491A

Click images to enlarge
Features:
  • 50,000 Count Dual Display
  • Vacuum-fluorescent Display (VFD)
  • Low Cost and High Performances
  • DCV, ACV, DCA, ACA, Frequency, Diode Continuity
  • DCV Measurement to 1000V, ACV to 750V (Up 1200Vdc, 1000Vac are measurable)
  • AC/DC Current Measurements to 10A (Up to 20A is measurable in less than 20 seconds).
  • True RMS (AC, AC+DC), 30Hz to 100kHz Measurement Bandwidth.
  • AC Current Measurement Bandwidth from 30Hz to 20kHz.
  • Frequency Measurements Up to 500KHz, 0.01 Hz Resolution.
  • Resistance Measurement Up to 50 M Ω, 10m Ω Resolutions.
  • dBm measurement with variable reference impedance from 2 Ω to 8000Ω.
  • Auto or Lock Ranging Relative Calculation.
  • Auto or Lock Ranging Dynamic Recording (MIN/MAX) with elapsed time.
  • Compare (Hi/Lo/Pass) function for quick in-tolerance test.
  • Percentage function transfers the measuring value to proportional percentage (%) display.
  • Fast Electronic and Closed-case calibration.
  • Data Hold to freeze displayed value.
  • Refresh Hold for difficult measuring place.
  • External trigger a one-time measurement to get the result as your needs.
  • RS 232 Interface.



  Description

The model 5491A is a very accurate 50,000 count, dual display, true RMS bench multimeter.

The meter is 50,000 count Dual Display Multi-meter. The meter is designed for bench-top, field service, and system applications with a high performance/price ratio. Impression with the RS-232 computer interface (standard), the meter is fully programmable for use on the RS-232 interface.

This meter has been designed and tested according to EN61010-1 (IEC1010-1), Safety Requirements for Electronic Measuring Apparatus. This manual contains information and warns which must be followed to ensure safe operation and retain the meter in safe condition. Use of this instrument in a manner not specified herein may impair the protection provided by the equipment.




  Models, Options, & Accessories


Model Description List Price Sale Price
5491A 50,000 Count Digit Dual Display Bench Multimeter $419.00
$309.99 
Model Accessories List Price Sale Price
AK 5491 Software and RS-232 cable for 5491A & 5492
$102.00 
LC 40 Function Generator Carrying Case
$88.00 
RK 01 Rack Mount Kit for single 5491A/5492
$51.00 
TL 1 Sheathed Test Lead Set
$8.50 
TL 35 Red & Black Test Leads
$30.16 
TL 36 Red & Black Test Lead
$30.16 



  Specifications

DC Voltage
Maximum Range 1000V
Best Accuracy +0.02% + 4 dgts
Best Resolution 10µV
AC Voltage (True RMS) Freq. 50Hz to 10KHz
Maximum Range 750V
Best Accuracy +0.5% + 15 dgts
Best Resolution 10µV
DC Current
Maximum Range 10A
Best Accuracy +0.05 + 4 dgts
Best Resolution 1µA
AC Current (True RMS, AC Coupled) Freq. 50Hz to 2KHz
Maximum Range 10A
Best Accuracy +0.5 + 25 dgts
Best Resolution 10µA
Resistance
Maximum Range 50MΩ
Best Accuracy +0.1 + 3 dgts
Best Resolution 10mΩ
Frequency
Maximum Range 500KHz
Best Accuracy +0.01 + 3 dgts
Best Resolution 10mHz
General
Warm up time At least 30 minutes
Temperature Coefficient Add 0.15 x (the applicable accuracy)/°C at 0°C to 18°C and 28°C to 50°C
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 60°C
Altitude Up to 2000 M
Pollution Degree II
Over-voltage category CAT III- 600V and CAT II-1000V
Relative Humidity Up to 80% (60% for 50MΩ range or resistance measurement)
Common Mode Voltage 1000V dc or peak ac rms maximum between any input and earth ground
Dimension Approx. 255(w) x 105(h) x 305(d) mm (with holsters)
Weight <3.0kgs
Line Voltage 100V / 120V / 220V / 240V ac ± 10%, 50/60Hz, 16VA maximum
Interface · RS-232 (DB-9, male connector)
· Baud rates: 9600, 4800, 2400, 1200, 600, 300
· Data length: 7 or 8 bits
· Parity: even / odd / none
· Stop bit: 1 or 2 bits
· Echo: on / off
· Print mode: on / off
Safety Requirement Designed in Compliance with EN61010-1 (IEC1010-1)
Installation Category CAT-II 750VAC/1000VDC or CAT-III 600V, Pollution Degree II Environment
EMC Requirement Designed in compliance with EN61326-1General




 

Welcome | Companies | Search by Type | How To Order | Leasing | About Us | Careers
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
BBBOnline Reliability Seal, Click for confirmation page. Tequipment.NET
Phone: 1-877-571-7901 / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET
 




BK 110% Price Match Guarantee

Quote Request

We Take POs, How To Order

Free Shipping on BK










Live chat by BoldChat
Need help? We have a staff
of more than 30 people to help you.
Let us show you why over 100,000
customers choose Tequipment.NET