|
BK 5105A Digital Oscilloscope 150MHz, 200MS/s, Digital Storage Scope, w/RS-232 Interface
Click image to enlarge
BK 5105A
|
|
Features:
- Auto set
- Readout cursors
- Save/Recall
- Component tester
- RS232 interface
|
Description
|
The model 5105A is a 150 MHz (200MS/s) Analog/Digital Storage Oscilloscope and it can store waveforms in memory. For one shot events, you can see what happened before the trigger. You can store up to two waveforms, each 2kx8 bit long. After acquisition, the data can be manipulated and displayed in many different ways. You can change time base or vertical position. You can select which portion of a waveform you'd like to look at in more depth. You can compare the measured waveform to a "known good" waveform in memory.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| 5105A |
150MHz, 200MS/s, Digital Storage Scope, w/RS-232 Interface - Discontinued - replaced by BK 5105B |
| Model |
Accessories |
List Price |
Sale Price |
| LC 210A |
Oscilloscope and Spectrum Analyzer Carrying Case |
| $95.68 |  |
|
| PR 150 |
150 MHz 1x/10x Oscilloscope Probe |
| $57.00 | |
|
| AD 110 |
Insulated BNC - 4mm Safety Jack - Discontinued - suggested replacement: CalTest CT2412 |
| CC 110 |
Insulated BNC - BNC Cable, Black - Discontinued - suggested replacement: CalTest CT2417-200-0 |
| CC-25 |
BNC / N Adapter Kit |
| $101.00 | |
|
| CC-41A |
BNC to BNC, RG58C/U, 36" |
| $10.40 | |
|
| PR 100A |
PR100A x100 Probe f/All Scopes |
| $64.00 | |
|
| PR 15K |
15KV 5 MHz OSCILLOSCOPE PROBE - Discontinued - no replacement |
| PR 2000 |
200 MHz 2kV Oscilloscope High Voltage Probe |
| $114.00 | |
|
| PR 32A |
RF Detect/Demodular Probe |
| $61.36 | |
|
| PR 33A |
10:1/Direct 90 MHz Scope Probe |
| $34.32 | |
|
| PR 37AG |
PR 37AG Deluxe 10:1 Gray Probe |
| $47.84 | |
|
| PR 4000 |
100 MHz 4KV Oscilloscope High Voltage Probe - Discontinued - suggested replacement: CalTest CT2591 |
| PR 46A |
250 MHz 10:1 Deluxe Probe |
| $67.60 | |
|
| PR-50 |
Oscilloscope Probe Set, 3 pieces - x1/x100/Switchable |
| $110.00 | |
|
| PR-55 |
High-Voltage Oscope Probe, 10kV, 50MHz |
| $329.00 | |
|
| PR-60 |
Active Differential Probe, x10/x100 |
| $379.00 | |
|
| TE 26 |
2615/20/25/30 Feed Thru 50 Ohm |
| $46.80 | |
|
Specifications
| Vertical Deflection |
| Operating modes |
Channel I or II separate both Channels (alternated or chopped) |
| Chopper frequency |
approx. 0.5MHz |
| Sum or Difference |
from CH I and CH II |
| Invert |
CH I and CH II |
| XY-Mode |
via channel I (Y) and channel II (X) |
| Frequency range |
DC to 150MHz (-3dB) |
| Rise time |
<2.3ns |
| Overshoot |
≤1% |
| Deflection coefficient |
14 calibrated positions from 1mV/div to 20V/div in 1-2-5 sequence, variable 2.5:1 to min. 50V/div |
| Accuracy in calibrated positions |
1mV/div - 2mV/div: ±5% (DC - 10MHz (-3dB))
5mV/div - 20V/div: ±3% |
| Input impedance |
1M II 15pF |
| Input coupling |
DC-AC-GD (ground) |
| Input voltage |
max. 400V (DC + peak AC) |
| Delay line |
approx. 70ns |
| Triggering |
| Automatic (peak to peak) |
20Hz - 250MHz (≥0.5div.) |
| Normal with level control |
DC - 250MHz (≥0.5div.) |
| Indicator for trigger action |
LED |
| Slope |
positive or negative |
| Sources |
Channel I or II, line and external |
| ALT. Triggering |
CH I/CH II (≥0.8div.) |
| Coupling AC |
(10 - 250MHz) |
| Coupling DC |
(0 - 250MHz) |
| Coupling HF |
(50kHz - 250MHz) |
| Coupling LF |
(0 - 1.5kHz) |
| Coupling NR (Noise reject) |
0 - 50MHz (≥0.8div.) |
| Triggering time base B |
normal with level control and slope selection (0 - 250MHz) |
| External |
≥0.3Vpp (0 - 250MHz) |
| Active TV Sync. Separator |
field & line, +/- |
| Horizontal Deflection |
| Analog Time Base |
Accuracy in calibr. position: 3%; 1-2-5 sequence
A: 0.5s - 50ns/div.
B: 20ms - 50ns/div.
Operating modes: A or B, alternate A/B
Variable: 2.5:1 up to 1.25s/div.
X-MAG. x10 (±5%): max. 5ns/div.
Holdoff time: variable to approx. 10:1
Bandwidth X-amplifier: 0 - 3MHz (-3dB)
X-Y phase shift: <3° below 220kHz |
| Digital Time Base |
Accuracy: 3%; 1-2-5 sequence
A: 100s - 0.1µs/div.
Peak detect: 100s - 5µs/div.
B: 20ms - 0.1µs/div.
Peak detect: 20ms - 5µs/div.
Operating modes: A or B, alternate A/B
X-MAG x10 (±5%): 10ns/div.
Bandwidth X-Amplifier: 0 - 20MHz (-3dB)
X-Y phase shift: <3° below 20MHz |
| Input X-amplifier |
via Channel II |
| Sensitivity |
see CH II |
| Digital Storage |
| Operating modes |
Refresh, Roll, Single, XY Peak Detect, Average (2 to 512), Envelope |
| Dot Join function |
automatically |
| Acquisition |
real time |
| 8 bit flash A/D |
max. 200MS/s |
| Peak detect |
5ns |
| Display refresh rate |
max. 180/s |
| Memory & display |
2k x 8bit per channel |
| Reference memory |
2 waveforms 2k x 8bit |
| Saved in |
EEPROM |
| Resolution (samples/div.) |
X: 200/div.
Y: 25/div.
XY: 25 x 25/div |
| Pre-/Post Trigger |
25, 50, 75, 100, -25, -50, -75% |
| Operation/Control |
| Manual |
front panel switches |
| Auto Set |
signal related automatic parameter selection |
| Save & Recall |
9 user defined parameter settings |
| Readout & Cursor (analog/digital) |
Display of parameter settings and other functions on the screen. Trigger point indication.
Cursor measurement of ΔU, Δt or 1/Δt (frequency), separate or in tracking mode |
| Readout intensity |
separately adjustable |
| Interface |
| PC remote control |
built in RS232 interface |
| Component Tester |
| Test voltage |
max. 7Vrms (o/c) |
| Test current |
max. 7mArms (s/c) |
| Test frequency |
approx. 50Hz |
| One test lead is grounded (Safety Earth) |
| General Information |
| CRT |
D14 375GY, 8 x 10cm internal graticule |
| Acceleration voltage |
approx. 14kV |
| Trace rotation |
adjustable on front panel |
| Calibrator |
0.2V ±1%, ≈ 1kHz/1MHz (tr <4ns) |
| Line voltage |
100 - 240V AC ±10%, 50/60Hz |
| Power consumption |
approx. 47 Watt at 50Hz |
| Min./Max. ambient temperature |
0°C ... +40°C |
| Protective system |
Safety class I (IEC1010-1) |
| Weight |
approx. 6.5kg (12.4lbs) |
| Color |
techno-brown |
| Cabinet |
W 285, H 125, D 380 mm |
| Lockable tilt handle |
7/00 |
| Accessories |
Operators Manual, 4 Disks, Line Cord, 2 Probes 10:1 |
|
;)
