| DIGITAL MODE SPECIFICATIONS |
| Digital Acquisitions Mode |
| Single |
0.1 µs to 200 s/div |
| Refresh |
0.1 µs to 200 s/div |
| Roll |
500 ms to 200 s/div |
| Envelope |
Available with REFRESH |
| Pretrigger |
In 1 k steps
0, 1, 2, 3, 4 k |
| Glitch Capture |
>50 ns from 200 ms to 10 µs/div |
| Vertical Resolution |
8 bit (256 levels) |
| Memory Capacity |
2 X 4k |
| Sampling Frequency |
40 MHz |
| Interpolation |
Linear and sinusoidal |
| Bargraph |
Expansion and movement indicator |
| Hard Copy Formats |
| HPGL |
HPGL devices |
| IBM Pr |
Quad density dot matrix printers |
| ESC P2 |
EPSON ink jet printers |
| PH-PCL |
Laser Printers |
| Hard Copy Interfaces |
| RS-232 |
Serial Port |
| Centro |
Centronics (HA 1251 Option) |
| Communication Interfaces |
| Uses |
Hard copy or remote programming (SCPI language) |
| AUTOMATIC MEASUREMENTS |
Rise Time
Fall Time
+Duty Cycle
-Duty Cycle
Amplitude
Period
Frequency
Phase
Average Voltage
Minimum Voltage
Maximum Voltage
Peak to Peak Voltage
Low Voltage
High Voltage
+Pulse Width
-Pulse Width
RMS Voltage |
| ANALOG MODE SPECIFICATIONS VERTICAL AMPLIFIERS (CH1 AND CH2) |
| Sensitivity |
10 mV/div to 200 V/div |
| Attenuator |
14 calibrated steps, 1-2-5 seq |
| Vernier control |
1/1 to 1/2.5 |
| Accuracy |
±3% |
| Input Impedance |
1 MW , 20pF |
| Bandwidth |
30 MHz |
| Rise Time |
< 17.5 ns |
| Crosstalk |
> 30dB |
| Chop Frequency |
200 kHz |
| Max. Input Voltage |
±500 Vrms CAT III |
| Pulse Performance |
5.5 kV (1.2/50 µ s) |
| Operating Modes |
CH1 CH1 only
CH2 CH2 only
ALT CH1 then CH2 Alternating
CHOP CH1 and CH2 chopped
XY X=CH1,Y=CH2
ADD CH1 x CH2 or CH1 - CH2
MULT CH1 x CH2 (Dig. mode only) |
| HORIZONTAL AMPLIFIER |
| X-Y Mode |
CH1 = X Axis
CH2 = Y Axis |
| Sensitivity |
0.2 µ s to 200 ms/div |
| Attenuator |
Same as vertical CH1 |
| Accuracy |
± 3% |
| Input Impedance |
Same as vertical CH1 |
| Frequency Response |
| CH1 DC Coupling |
0 Hz to 2 MHz |
| AC Coupling |
10 Hz to 2 MHz |
| CH2 DC Coupling |
OHz to 30 MHz |
| AC Coupling |
10 Hz to 30 MHz Phase |
| Difference |
< 3% at 120 kHz |
| SWEEP SYSTEM |
| Sweep Speed |
0.2µ s/div to 200 ms/div, 1-2-5 sequence, 20 positions, fully adjustable |
| Accuracy |
±3%, x10 expansion, ±5% |
| Holdoff |
Cont. Adjustable from 1 to 10x |
| TRIGGERING |
| Triggering Modes |
Auto, Normal |
| Triggering Source |
CHI, CH2, ALT, LINE, EXT |
| Triggering Coupling |
AC: 10 Hz to 60 MHz
DC: 0 Hz to 60 MHz |
| LFR (rej) |
10 Hz to 60 MHz |
| H FR (rej) |
0 Hz to 10 kHz |
| TVH |
Video hor. (line) Sync pulses selected |
| TVV |
Video vert. (field) Sync pulses selected |
| Trigger Slope |
Negative and Positive edge |
| Trigger Level |
Normal ± 12 divisions |
| Trigger Delay |
yes |
| READOUTS |
| Cursor Measurement |
Voltage, Time, Frequency, Phase |
| OTHER SPECIFICATIONS |
CRT 6 inch rectangular with internal graticule, 8 X 10 div, GY Phosphor |
| Accelerating Voltage |
2 kV, 12 kV |
| Z Axis Modulation |
TTL level |
| Input Resistance |
2 kW |
| Bandwidth |
4 MHz |
| Max. Input Voltage |
±20 VDC |
| Calibration Signal |
Squarewave |
| Amplitude |
0-2V |
| Frequency |
1 kHz |
| Power Requirements |
110, 230 VAC 50/60 Hz, 80 W |
| Dimension |
6.1 X 13.4 X 17.7" (155 X 340 X 450mm) |
| Weight |
15.4 lbs. (7 kg) |
| Accessories |
| SUPPLIED |
Operating Manual
Two Probes PR-150 or equivalent
AC line cord
Slow blow ceramic fuses: 0.315 A for 230/240 V or 0.630 A for 110V |
| OPTIONAL |
Centronics Adapter: HA 1251 |
| Software |
AK51 00 |
;)
