|
BK 2870 Survivor DMM Multimeter
Click image to enlarge
BK 2870
|
|
Features:
- Heavy Duty 1500 VDC rating
- True RMS
- 0.25% accuracy
- Auto ranging
- 3 3/4 digit, 3200 count display
- Ruggedized construction
- Includes rubber boot
- Withstands 5 foot drop
- Extra large, high contrast LCD display
- Gasket sealed against dirt and contaminants
- Water resistant
- High energy fused on all current ranges
- Auto power off saves batteries
- Built in probe holders
|
Description
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| 2870 |
SURVIVOR DMM - Discontinued - replaced by BK 2860A |
| Model |
Accessories |
List Price |
Sale Price |
| TL 1 |
Sheathed Test Lead Set |
| $8.50 |  |
|
| TL 2A |
Deluxe Test Lead Set |
| $20.80 | |
|
| TL 3 |
Tip Kit Accessories for TL 2A |
| $17.00 | |
|
| TL 130A |
General Purpose DMM Kit |
| $42.00 | |
|
| PR 28A |
40kV High Voltage DMM Probe |
| $62.00 | |
|
| LC 29B |
DMM Carrying Case |
| $17.75 | |
|
| CP 3 |
AC/DC Clamp Accessory for DMMs |
| $93.00 | |
|
Specifications
| DC Volts |
Auto/Manual ranging |
| Ranges |
320 mV, 3.2V, 32V, 320V, 1500V |
| Resolution |
100 uV, 1 mV, 10 mV, 100 mV, 1V |
| Accuracy |
+-(0.25% rdg + 2 dgt) |
| Overload protection |
1500V peak |
| Input Impedance |
10 M |
| AC Volts |
Auto/Manual ranging True RMS |
| Ranges |
3.2V, 32V, 320V, 750V |
| Resolution |
1 mV, 10 mV, 100 mV, 1V |
| Accuracy |
+-(1.3% rdg + 3 dgt) |
| Frequency Response |
40Hz - 1 kHz |
| Overload Protection |
1100V peak |
| Input Impedance |
10 M |
| Current |
Auto/Manual ranging AC True RMS |
| Ranges |
320uA, 3.2mA, 32mA, 300mA, 20A* |
| Resolution |
0.1uA, 1uA, 10 uA, 100 uA, 10 mA |
| Accuracy (DC) |
+-(1.0% rdg + 2 dgt)
+-(2.0% rdg + 3 dgt) for 20A |
| Accuracy (AC) |
+-(2.5% rdg + 3 dgt)
+-(2.5% rdg + 5 dgt) for 20A |
| Frequency Response |
40Hz - 1 kHz |
| Overload Protection |
High energy 600V, 1A full for uA/mA, High energy 600V, 15A for 20A |
| Resistance |
Auto/Manual ranging |
| Ranges |
320, 3.2kOhm, 32kOhm, 320kOhm, 3.2MOhm, 32MOhm |
| Resolution |
0.1, 1 Ohm, 10Ohm, 100Ohm, 1 kOhm, 10 kOhm |
| Accuracy |
+-(0.5% rdg + 2 dgt)
+-(2.0% rdg + 5 dgt) for 32M |
| Overload Protection |
600V peak |
| Diode Check |
Tested at 1.5 mA, 3.3V max typical tested at 1 mA 3.2V max typical |
| Continuity |
Beeper sounds below 200 approx |
| Display |
0.53'' LCD, 3200 count with 65-segment analog bargraph |
| Sampling rate |
2/sec., 12/sec. for bargraph |
| Operating Temperature |
32 0 to 122 0 F (0 0 C to 50 0 C), < 80% RH |
| Power |
Single 9V battery |
| Battery life |
200 hrs typ (alkaline) |
| Auto power off |
Approx 10 min |
| Dimensions (HxWxD) |
6.88x3.19x1.25'' (175x81x32 mm) |
| Five Year Warranty |
| Accessories |
| SUPPLIED |
Battery, test leads, rubber holster, manual |
| OPTIONAL |
TL-1 Replacement Test Leads, TL-2A Deluxe Test LEads, TL-3 Accessory TIp Kit (for TL-2A), TL-130A General Purpose DMM Kit, PR-28A High Voltage Probe, CP-3 AC/DC Current Clamp Adapter |
| Carrying Case (not included) |
LC-29B |
| *10A continuous, 20A for 30 seconds max |
|
;)
