| Frequency section |
| Frequency range |
50kHz to 3.3GHz |
| Center frequency |
| Resolution |
100kHz
Settable via rotary encoder, numeric or function key |
| Accuracy |
within ±(30 + 20T)kHz ± 1dot
@frequency span: 200kHz to 10MHz, RBW- 30kHz, 23 ± 5°C
within ±(100 + 700T)kHz ± 1dot
@frequency span: 20MHz to 3.3GHz, RBW- 100kHz, 23 ± 5°C |
| RBW frequency error |
within ±6% of RBW @RBW: 3kHz, 30kHz
within ±30% of RBW @RBW: 100kHz to 3MHz |
| Frequency span |
| Range |
0Hz (zero span)
200kHz to 2GHz (1-2-5 step) and 3.3GHz |
| Accuracy |
within ±3% ± 20TkHz ± 1dot
@frequency span: 200kHz to 10MHz, 23 ± 5°C
within ±3% ± 200TkHz ± 1dot
@frequency span: 20MHz to 3.3GHz, 23 ± 5°C |
Display resolution
(horizontal) |
Frequency span/250
The unit displays 251 horizontal dots but stores 1001 trace data points internally which can be captured via RS232 interface |
| Resolution bandwidth (-3dB bandwidth) |
| Range |
3kHz to 3MHz (1-3 step) and AUTO |
| Accuracy |
within ±20% |
| Shape Factor |
1to12 (typical, 3dBto60dB) |
| Video bandwidth |
100Hz to 1MHz (1-3 step), AUTO |
| SSB phase noise |
-90dBc/Hz (typical) @100kHz offset, RBW- 3kHz, VBW- 100Hz, Sweep time- 0.3s |
| Spurious response |
< -60dBc |
| Harmonics |
< -40dBc @100MHz to 3.3GHz |
| Amplitude section |
| Reference level |
| Range |
+10 to -60dBm (1dB step) |
| Accuracy |
within ±0.8dB ± 1dot
@center frequency: 100MHz, RBW- 3MHz, VBW- 1MHz, ATT- 0dB, 23 ± 5°C |
| Unit |
dBm, dBV, dBmV, dBµV, dBµV/m, dBµA/m
(dBµV/m and dBµA/m are available for certain measurement functions) |
| Average noise level |
-110dBm (typical)
@center frequency- 100MHz, RBW- 3kHz, VBW- 100Hz |
| Frequency response |
Within ±2.0dB ± 1dot @50kHz to 100MHz
Within ±1.0dB ± 1dot @100MHz to 3.3GHz |
| Input impedance |
50Ω |
| Input VSWR |
< 2.0 |
| Input attenuator |
| Operating range |
0 to 25dB (1dB step), coupled with reference level |
| Switching error |
within ±0.6dB @100MHz |
| RBW switching error |
within ±0.6dB |
| Display resolution |
200 dots |
| Display scale |
| Scale |
10dB/div, 2dB/div |
| Accuracy |
within ±0.8dB/10dB ± 1dot
within ±0.2dB/2dB ± 1dot
within ±1.6dB/70dB ± 1dot |
| Input damage level |
+23dBm (CW average power), 25VDC |
| Sweep section |
| Sweep time |
| Range |
10ms to 30s and AUTO (1-3 step) @ 0 to 2GHz span
30ms to 30s and AUTO (1-3 step) @full span |
| Accuracy |
within ±0.1% ± 1dot @ 0 to 2GHz span
within ±1.5% ± 1dot @ full span |
| Trigger mode |
AUTO (frequency span: zero span) |
| Detection mode |
Positive peak, Negative peak, Sample |
| Measurement and Calculation Functions |
| Markers |
NORM- displays frequency (7 digits max) and level (4 digits max) at marker point.
DELTA- displays ∆f (Frequency) and ∆dBx (level) |
| Peak search |
NORM- searches a peak point within full range. This mode also supports NEXT peak (10max).
ZONE- searches a peak point within a zone defined by center and width. |
| Calculations |
NORM, MAX HOLD, MIN HOLD, AVERAGE, OVER WRITE
MAX/MIN HOLD- 2 to 1024 times
AVERAGE- 2 to 256 |
| Measurements |
Measure Channel power, Adjacent channel leakage power, Occupied frequency bandwidth, Electric field strength (requires antenna), Magnetic field strength (requires magnetic field probe) |
| AUTO tuning |
Automatically scans the full bandwidth, detects the maximum level spectrum and centers it on screen. Automatically adjusts reference level, RBW, VBW and sweep time to optimum levels. |
| Tracking Generator |
| Frequency range |
5MHz to 3.3GHz |
| Output Level |
-10dBm ± 1dB @1GHz (fixed) |
| Output flatness |
±1.5dB |
| Output impedance |
50Ω |
| VSWR |
< 2.0 |
| Output connector |
SMA (J) |
| General |
| Input connector |
SMA (J) |
| Save/Load |
| Save |
Saves 100 traces and 100 setups |
| Load |
Loads 1 trace and 1 setup |
| Communications |
| Interface |
RS-232C |
| Baud rate |
2,400 to 38,400bps |
| Hard copy (Allows direct hard copy with optional printer.) |
| Display |
| Display |
LCD |
| Backlight |
CFL backlight |
| Resolution |
320 (H) × 240 (V) dots |
| Power source |
| Battery |
Ni-MH battery |
| Operating Time |
Approx. 110 min. with the backlight turned off (battery fully charged) |
| External DC source |
DC jack, +4.75 to +5.25VDC/4A |
Immunity of radiated interference
Level display at 10V/m |
Less than -35dBc (reference level- 10dBm) |
Immunity to cabled interference
Level display at transient interference of 4.0kV |
Less than -30dBc (reference level: 10dBm) |
| Environmental and size |
| Operating temperature |
0 to 50°C (Guaranteed at 23 ± 10°C, without soft carrying case) |
| Operating humidity |
less than 40°C/80%RH
(Guaranteed at less than 33°C/70%RH, without soft carrying case) |
| Storage temperature |
-20 to 60°C, less than 60°C/70%RH |
| Dimensions |
162 (W) × 70 (H) × 260 (D) mm
6.38 (W) × 2.76(H) × 10.25 (D) inch
(exclude projections and stand) |
| Weight |
approx. 4lbs (1.8kg), including battery
approx. 3.3lbs (1.5kg) without battery |
;)
