| Time Base Characteristics |
| Type |
TCO (Temperature Controlled Oscillator) |
| Line Voltage Stability |
Less than ± 1 PPM with ± 10% line voltage variation |
| Int. Std. Out |
10 MHz (Internal Standard Frequency Output) |
| Level |
1 V p-p or more. TTL (10TTL) |
| Ext. Std. In |
10 MHz (External Standard Frequency Input) |
| Display |
Nine Digit 0.56" LED with M (Mega) or K (Kilo) Hz; nano, micro, or milli (n/µ/m) Sec.; GT (GATE TIME); H (HOLD); and OF (OVERFLOW) indicators. FUNCTION and GATE TIME are user selected. OF display is shown when the count exceeds 999 999 999 |
| Hold |
In the FREQUENCY, PERIOD, TOTAL, RPM modes, measurement in progress is stopped; and the last complete measurement is displayed. When HOLD is released, a new measurement begins |
| Gate Time |
Depending on input frequency < 10 mS - Somewhere between 0.9 and 9mS < 0.1 S - Somewhere between 9 and 90mS < 1 S - Somewhere between 90 and 900mS < 10 S - Somewhere between 0.9 and 9S |
| Note |
Last measurement display will remain for 10 seconds after signal off |
| Dimensions (WxHxD) |
9.4 x 3.5 x 10.6" (240 x 90 x 270mm) |
| Power |
115VAC±10%, 50-60 Hz, 9 W |
| Plug and Socket |
3 wire ac power plug and 3 wire outlet |
| Temperature |
0 °C to +40 °C (Accuracy Specified at 23 °C ± 5 °C) |
| Humidity |
up to 85% RH (Relative Humidity) to 40 °C without temperature extremes causing condensation within the instrument |
| Insulation Category II |
Portable equipment of local level |