Our agents are available:
9:00 AM - 6:00 PM EST
Applied Instruments Dual Buddy Satellite Signal Meter
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   
Applied Instruments Dual Buddy Satellite Signal Meter



Click image to enlarge

 Applied Instruments Dual Buddy

Features:
  • Two LNB signal inputs
  • Field replaceable connectors
  • 22 kHz switch control (also DiSEqC™ standard)
  • Bright LED display, easy to read even in direct sunlight
  • Strong audible tone with DSB (Dual Signal Balance Mode)
  • Able to power LNB from internal battery or IRD
  • Rugged metal enclosure
  • Economical and easy to use
  • Includes: wall charger and car charger


  Description

The Dual Buddy is a satellite signal meter that measures relative RF signal strength when connected to a dish antenna. The Dual Buddy's two input connectors and switching capabilities allow the measurement of separate satellite feeds and simultaneously display their relative signal strength, alowing the installer to easily balance a multi-sat installation. The rugged weather-resistant metal enclosure allows the Dual Buddy to stand tough and give years of dependable service.

Measures:
  • Signal strength (RF energy 950 to 2150 MHz)
  • LNB current draw (mA)
  • Voltage supplied by the IRD set top box
  • Internal battery voltage


  Models, Options, & Accessories


Model Description List Price Sale Price
Dual Buddy Satellite Signal Meter (950-2150 MHz) $249.00
$241.53 
SAT Buddy 2 Satellite Signal Meter (950-2150 MHz) $199.00
$193.03 
SAT Buddy Satellite Signal Meter (950-2150 MHz) $165.00
$160.05 
Model Accessories List Price Sale Price
967-2001 CAR CHARGER For SatBuddy, SatBuddy2, & Dual Buddy
$16.50 
741-00020 WALL CHARGER For SatBuddy, SatBuddy2, & Dual Buddy
$16.00 


  Specifications

Frequency range 950 to 2150 MHz
Impedance 75Ω
Measurable input level -48 to -8 dBm total power
-60 to -20 dBm per transponder
Insertion loss 6 dB (950 to 1450 MHz)
11 dB (1450 to 2150 MHz)
Size (H x W x D) 6.5" x 2.7" x 1.1", 1.0 lbs
(16.5cm) x (6.9cm) x (2.8cm), 455g
Temperature range 0°F to 125°F
(-17°C to +50°C)
Connectors Type F female (field replaceable)
Power Uses IRD power when connected, otherwise uses internal battery. IRD voltage loss through the SAT Buddy is 1.3 V. Current consumed by the SAT Buddy is 90 mA.
LNB Power Current limited at 475 mA.
Internal Battery Pack Rechargeable 12 cell NiMH 300 mAh, 12-16 V nominal, automatic shutoff, 1.8 hours typical use per charge.
Battery Charge Time ±12 hours from wall charger
Wall Charger Output 12 VDC, 200 mA, center pin positive, 2.1mm I.D.
Signal Measure Mode Signal Level Display: Bargraph LEDs left row x 10, right row x 1
Audible Tone: Dual beep rate with solid tone at peak
Current/Voltage Mode LNB Current Draw: 0 to 500 mA (each LED segment is 50 mA)
LNB Supply Voltage: 10 to 20 volts (each LED segment is 1V, above 9V)
Standard Accessories Padded carrying case with belt clip
Wall transformer for charging battery, 120V or 240V
Automobile cigarette-lighter adapter battery charger


   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com 		BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET