| Technical |
| DC Voltage |
400.0mV/4.000/40.00/400.0/600V ±(1.0% Rdg + 2 LSD) |
| AC Voltage |
400.0mV ±(1.0%Rdg + 50 LSD) 4.000/40.00/400.0/600V ±(1.2% Rdg + 3 LSD) |
| AC/DC Current |
40.00/400.0A ±(2% Rdg + 10 LSD) @50 - 60hz |
| Resistance |
400.0Ω, 4.000/40.00/400.0kΩ ±(1% Rdg + 5 LSD) 4.000/40.00MΩ ±(3% Rdg + 3 LSD) |
| Safety |
| Comply with |
EN 61010 |
| Insulation |
Class 2, double reinforced insulation |
| Pollution |
Level 2 |
| For inside use, max height |
2000m |
| Over voltage |
CAT III 600V (between ground & input terminal) |
| Mechanical Characteristics |
| Size |
205(L) x 64 (W) x 39(H)mm |
| Weight (including battery) |
about 280g |
| Jaws opening |
30mm |
| Max conductor size |
30mm |
| Supply |
| Batteries type |
2 batteries 1.5V LR03 AAA. |
| Low battery indication |
Symbol " " is displayed when battery level is too low. |
| Battery life |
About 25 hours. |
| Display Characteristics |
3 _ LCD w/ maximum reading 3999 units plus decimal point signs plus backlight |
| Sample rate |
2 times/sec. 20 times/sec. for analogical bargraph |
| Conversion mode |
mean value |
| Climatic Conditions |
| Reference temperature |
23° ± 5°C |
| Operating temperature |
5 ÷ 40 °C |
| Operating humidity |
<80% RH |
| Storage temperature |
-10 ÷ 60 °C |
| Storage humidity |
<80% RH |
| EMC |
This apparatus was designed in accordance with EMC standards in force and its compatibility has been tested in accordance EN61326 (1997) + A1 (1998) + A2 (2001). |
| Standard Accessories |
| The accessories contained inside the packaging are the following |
Instrument, Test leads (MTL-90B), Rubber test lead holster (MTL-CAP), User’s manual, Carrying case (SV-U), Batteries |
;)
