Amprobe ACD-10 TRMS PLUS Clamp-On Multimeter 600A Amprobe ACD-10-TRMS-PLUS ACD 10 TRMS PLUS ACD10TRMSPLUS

Amprobe ACD-10 TRMS PLUS
600A Clamp-On Multimeter

Search:

Amprobe ACD-10 TRMS PLUS
600A Clamp-On Multimeter

Click image to enlarge

Amprobe
ACD-10 TRMS PLUS

Datasheet

Includes:

Test leads
Battery
Soft carrying pouch
Users Manual

Features:

TRMS Measurement
AC & DC Voltage to 600V
AC Current to 600A
Thin Jaws, only 10mm (0.4”) thick
Resistance to 40MW
Continuity Buzzer
Capacitance to 3000 uF
Frequency measurement
In rush current
Hold & Maximum reading functions
Accommodates conductors up to 26mm (1.02”) in diameter
Auto ranging
Auto power off
Rubber over-molded case

Description

Amprobe’s ACD-10 TRMS-PLUS meter offer thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25 mm. Both meters also measure Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeters. True RMS version for noisy measurement environments for a more accurate reading.

Models, Options, & Accessories

Model

Description

List Price

Sale Price

ACD-10 TRMS-PLUS

DIGITAL CLAMP ON METER, TRUE RMS, CAP, FREQ

$129.95

$113.06

Specifications

General Specifications
Display	3-3/4 digits 4000 counts LCD display
Update Rate	3 per second nominal
Polarity	Automatic
Operating Temperature	0 °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude	Operating below 2000m; Indoor use
Storage Temperature	-20 °C to 60 °C, < 80% RH (with battery removed)
Temperature Coefficient	nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low Battery	Below approx. 2.4V
Power Supply	3V coin battery IEC-CR2032
Power Consumption	2.8 mA typical except that 3.3 mA typical for ACA function
APO Timing	Idle for 30 minutes
APO Consumption	5 μA typical
Dimension	190 x 63 x 32 mm (7.4 x 2.5 x 1.3 in)
Weight	139 gm approx
Jaw opening & Conductor diameter	max 26 mm
Special Features	30ms Max Hold; Data Hold; Relative Zero mode
Safety	Meets EN61010-2-032, UL61010B-2-032, IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed. CAT III-600 Volts ac & dc; Pollution degree - 2
EMC	Conforms to EN61326-1.
This product complies with requirements of the following European Community Directives; 89/ 336/ EEC (Electromagnetic Compatibility) and 73/ 23/ EEC (Low Voltage) as amended by 93/ 68/ EEC (CE Marking). However, electrical noise or intense electromagnetic fields in the vicinity of the equipment may disturb the measurement circuit. Measuring instruments will also respond to unwanted signals that may be present within the measurement circuit. Users should exercise care and take appropriate precautions to avoid misleading results when making measurements in the presence of electronic interference.

Amprobe
Main Page

Amprobe
Multimeters

Amprobe
Price List

Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740

BBBOnline Reliability Seal, Click for confirmation page.

Tequipment.NET
Phone: 1-877-571-7901 / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET