| General Specifications |
| Display |
3½ digit liquid crystal display (LCD) with a maximum reading of 1999. |
| Polarity |
Automatic, positive implied, negative polarity indication. |
| Overrange |
(OL) or (-OL) is displayed. |
| Zero |
Automatic. |
| Low battery indication |
The B is displayed when the battery voltage drops below the operating level. |
| Measurement rate |
2.5 per second, nominal. |
| Operating environment |
0 °C to 50 °C at < 70 % R.H. |
| Storage temperature |
-20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter. |
| Temperature Coefficient |
0.1 × (specified accuracy) per °C. (0 °C to 18 °C, 28 °C to 50 °C). |
| Environment |
Indoor use, Altitude up to 2000 m |
| Power |
Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22. |
| Battery life |
200 hours typical with carbon-zinc. |
| Dimensions |
196 x 92 x 60 mm ( 7.7” x 3.5” x 2.4”). |
| Weight |
Approx. 426 .( 0.94 lb.) without holster, including battery. |
| Warranty |
One (1) Year |
| Electrical Specifications |
| DC Voltage Ranges |
200 mV, 2 V, 20 V, 200 V, 600 V |
| DC Voltage Accuracy |
all ranges: ± (1 % rdg + 1 dgt) |
| DC Voltage Resolution |
100 µV |
| DC Voltage Input Impedance |
10 Mω |
| AC Voltage (45 Hz to 500 Hz) Ranges |
200 mV, 2 V, 20 V, 200 V, 600 V |
| AC Voltage (45 Hz to 500 Hz) Accuracy |
all ranges: ± (1.5 % rdg + 4 dgts) |
| AC Voltage (45 Hz to 500 Hz) Resolution |
100 µV |
| AC Voltage (45 Hz to 500 Hz) Input Impedance |
10 Mω |
| DC Current Ranges |
200 µA, 2 mA, 20 mA, 200 mA, 10 A |
| DC Current Accuracy |
200 µA to 200 mA ranges: ± (1.5 % rdg + 1 dgt) |
| DC Current Accuracy |
10 A range: ± (2.0 % rdg + 3 dgts) |
| DC Current Resolution |
0.1 µA |
| DC Current Voltage Burden (Max) |
200 µA range: 1 mV/µA |
| DC Current Voltage Burden (Max) |
2 mA range: 100 mV/1mA |
| DC Current Voltage Burden (Max) |
20 mA range: 13 mV/1 mA |
| DC Current Voltage Burden (Max) |
200 mA range: 4.6 mV/1 mA |
| DC Current Voltage Burden (Max) |
10A range: 40 mV/1 A |
| AC Current (45 Hz to 500 Hz) Ranges |
200 µA, 2 mA, 20 mA, 200 mA, 10 A |
| AC Current (45 Hz to 500 Hz) Accuracy |
200 µA to 200 mA ranges: ± (2.0 % rdg + 4 dgts) |
| AC Current (45 Hz to 500 Hz) Accuracy |
10A range: ± (2.5 % rdg + 4 dgts) |
| AC Current Resolution |
0.1 µA |
| AC Current Voltage Burden |
See DC Current |
| Non-Contact Voltage Detector (NCV) AC Volts |
70 to 600 V ac |
| Non-Contact Voltage Detector (NCV) |
Red LED and Audible Indicator |
| Overload Protection |
| AC/DC Voltage |
400 mV range: 600 V dc or 600 V ac rms ]5 sec
All other ranges: 600 V dc or 600 V ac rms |
| AC/DC Current |
uA/mA input: F 0.25 A/ 600 V Min. I.R. 30 kA (6.3 x 32 mm)
10 A input F 10A / 600V, Min. I.R. 100 kA, (10 x 38 mm)
(10 A for 4 minutes maximum followed by a 12 minute cooling period) |
| Resistance |
600 V dc or 600 V rms |
| Continuity |
600 V dc or 600 V ac rms |
| Diode Test |
600 V dc or 600 V ac rms |
| Battery Test |
600 V dc or 600 V ac rms |
;)
