|
Agilent N2282A
Optical Multiplexer Module
Click image to enlarge
Agilent N2282A
|
 3499 Switch/Control data sheet
|
Features:
- Modular optical switching save rack space and integration time
- High speed optical switching increase test throughput
|
Description
The Agilent N2282A (1 x 8) optical module brings the flexibility of 1270-1670nm optical signal switching based on the Agilent 3499 switching family. The optical switching module, combined with other 3499 family electronic modules, provides a total switching solution in hybrid test systems. With the modular optical switching, test engineers can set up an ATE system with just enough optical switching channels to fit the current application, and add more channels later as the application grows.
The N2282A module is ideal for SONET/SDH test, OADM test, fiber-optical component test and fiber-optical network monitoring. It can also be used in fiber-optical network configuration and multi-source selection/measurement. Two channels in different modules can be synchronously switched with the "CARD PAIR" command. The module is optically passive, and operates independently of data rate, data format and optical signal direction; therefore, it is transparent to signaling formats. The SC/APC connectors provide reliable and easy connection. The two-slot N2282A module can only be operated in SCPI mode when installed in 3499A/B mainframes with firmware 3.0 or later.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| N2268A |
Dual 1x4 RF (3.5GHz) Multiplexer Module for 3499A/B |
| $3018.00 |  |
|
| N2272A |
1X9 RF (1GHz) Multiplexer module |
| $1565.00 | |
|
| N2276A |
Dual 20 GHz Microwave Multiplexer |
| $6185.00 | |
|
| N2276B |
Microwave Mux/Attenuator Driver - Discontinued - no replacement |
| 44472A |
Dual 1x4 VHF (300MHz) Multiplexer Module |
| $1250.00 | |
|
| 44478A |
Dual 1x4 RF (1.3GHz) Multiplexer Module (50 Ohm) for 3499A/B. |
| $1596.00 | |
|
| 44478B |
Dual 1x4 RF (1.3GHz) Multiplexer Module (75 Ohm) for 3499A/B. |
| $1724.00 | |
|
| 44476A |
Triple 1x2 Microwave (18GHz) Module for 3499A/B |
| $4060.00 | |
|
| 44476B |
Microwave Relay Driver Module for 3499A/B. |
| $900.00 | |
|
Specifications
| Plug-in Module Specifications |
| Module |
Description |
Max. Voltage |
Max. Current per Chan. |
Initial Closed Channel Resistance |
Thermal Offset per Chan. |
Bandwidth |
Connection Type |
Relay Cycle Counter |
| Multiplexer Modules |
| N2260A |
40-channel |
200V |
1A |
<1 O |
<3μV |
10MHz |
T or C |
Yes |
| N2266A |
40-channel |
200V |
0.5A |
<1 O |
<50μV |
40MHz |
T or C |
Yes |
| N2270A |
10-channel |
1000V |
1A |
<1 O |
<200µV |
5 MHz |
Crimp & Insert |
Yes |
| 44470A |
10-channel |
250V |
2A |
<1 O |
<3µV |
10MHz |
T |
|
| 44470D |
20-channel |
250V |
2A |
<1 O |
<3µV |
10MHz |
T |
|
| General-purpose Relay Modules |
| N2261A |
40-channel |
200V |
1A |
<0.5 O |
<3µV |
10MHz |
T or C |
Yes |
| N2267A |
8-channel |
250V |
8A |
<0.08 O |
<3µV |
20MHz |
Crimp & Insert |
Yes |
| 44471A |
10-channel |
250V |
2A |
<1 O |
<3µV |
10MHz |
T |
|
| 44471D |
20-channel |
250V |
1A |
<1 O |
<3µV |
10MHz |
T |
|
| 44477A |
7-channel |
250V |
2A |
<1 O |
<3µV |
10MHz |
T |
|
| Matrix Modules |
| N2262A |
4 x 8 matrix |
200V |
1A |
<1 O |
<3µV |
10MHz |
T or C |
Yes |
| 44473A |
4 x 4 matrix |
250V |
2A |
<1 O |
<3µV |
10MHz |
T |
|
| Digital I/O Modules |
| N2263A |
32-bit TTL |
42V |
0.6A |
NA |
NA |
NA |
T or C |
|
| 44474A |
16-bit TTL |
30V |
0.125A |
NA |
NA |
NA |
T |
|
| Multifunction Modules |
| N2264A |
12 GP |
200V |
1A |
<0.5 O |
<3μV |
10MHz |
T or C |
Yes |
| |
3 GP |
125V |
5A |
<0.1 O |
<3μV |
10MHz |
T or C |
Yes |
| |
16-bit DIO |
42V |
0.6A |
NA |
NA |
NA |
T or C |
|
| N2265A |
4 x 4 matrix |
200V |
1A |
<1 O |
<3μV |
10MHz |
T or C |
Yes |
| |
16-bit DIO |
42V |
0.6A |
NA |
NA |
NA |
T or C |
|
| Note: GP = General-purpose, DIO = Digital I/O, T = Terminal Block, C = Cable. |
| Fiber-optical Multiplexer Modules (typical specs) |
| Modules |
Description |
Insertion loss |
Stability |
Repeatability |
Wavelength |
Connector Switching Time |
Switching Time |
| N2280A |
Quad 1 x 2 |
0.5 dB |
± 0.03dB |
± 0.005dB |
1310/1550 nm |
SC/APC |
15 ms |
| N2281A |
Dual 1 x 4 |
0.5 dB |
± 0.03dB |
± 0.0065dB |
1310/1550 nm |
SC/APC |
20 ms |
| N2282A |
Single 1 x 8 |
0.5 dB |
± 0.02dB |
± 0.005/0.01dB |
1270/1670 nm |
SC/APC |
250 ms |
| Modules |
Description |
Insertion loss |
Cross talk |
SWR |
Bandwidth |
Impedance |
Connector |
| N2268A |
Dual 1 x 4 |
<0.35dB |
≤64dB |
<1.20 |
3.5 GHz |
50 Ω |
SMA |
| N2272A |
Single 1 x 9 |
<0.5dB |
≤75dB |
<1.20 |
1.0 GHz |
50 Ω |
BNC |
| N2276A |
Dual 1 x 6 |
<0.36dB |
≤100dB |
<1.20 |
20 GHz |
50 Ω |
SMA |
| N2276B |
Relay driver can support 2 microwave switches. Technical specs depend on the mounted relays. |
| 44472A |
Dual 1 x 4 |
<0.75dB |
≤85dB |
<1.12 |
300 MHz |
50 Ω |
BNC |
| 44478A |
Dual 1 x 4 |
<1.1dB |
≤70dB |
<1.35 |
1.3 GHz |
50 Ω |
BNC |
| 44478B |
Dual 1 x 4 |
<1.1dB |
≤70dB |
<1.35 |
1.3 GHz |
75 Ω |
BNC |
| 44476A |
Triple 1 x 2 |
<0.25dB |
≤90dB |
<1.15 |
18 GHz |
50 Ω |
SMA |
| 44476B |
Relay driver can support 2 microwave switches. Technical specs depend on the mounted relays. |
| Relay Life: |
>107(cycle) |
| Optical Fiber type: |
9/125 |
| Wavelength Range: |
1270/1670nm |
| Insertion loss1 |
SM (single mode) |
≤0.7dB |
| Return loss1 |
SM (single mode) |
≤57dB |
| Polarization dependent loss (SM) |
≤0.04dB |
| Insertion loss stability2 |
≤ ±0.025dB |
| Repeatability: |
| Sequential |
≤ ±0.01dB |
| Random |
≤ ±0.05dB |
| Crosstalk: |
≤-90dB |
| Optical input power: |
≤300mW |
| Switching time: |
≤250ms |
| Connectors: |
SC/APC |
- Excluding connectors
- After one-hour warm-up
|
;)