|
Agilent E4418B
Single-Channel Power Meter
Click image to enlarge
Agilent E4418B
|
|
Features:
- Fast measurement speed (up to 200 readings per second, over the GPIB, with E-series sensors)
- Speed improvement of x2 using the 8480 series power sensor (compared to the 437B)
- No range-switching delays with 8480 series sensors, and only one fast-range switch point with E-series sensors
- RS 232/422 serial interfaces as standard
- GPIB connector for remote control of all functions
- Internal rechargeable battery option provides up to 3 hours continuous use (option 001)
- Code compatibility with 437B and 436A
- Conformity to CE and CSA standards
Warranty
1 year standard warranty
|
Description
The Agilent E4418B is a low-cost, high-performance, single-channel, programmable power meter. It is fully compatible with the 8480 series and the E-series power sensors (except the E9320A family). Depending upon which sensor is used, the E4418B can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz.
Designed for bench and automatic test equipment (ATE) use, the E4418B makes fast (up to 200 readings per second with E-series sensors), accurate and repeatable power measurements.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| E4416A |
Single channel EPM-P series power meter |
| $4754.00 |  |
|
| E4417A |
Dual channel EPM-P series power meter |
| $7471.00 | |
|
| E4418B |
Single Channel EPM series Power Meter |
| $3663.00 | |
|
| E4419B |
Dual Channel EPM series Power Meter |
| $6277.00 | |
|
| Model |
Options |
List Price |
Sale Price |
| E4418B-001 |
Mains power and Internal rechargeable battery |
| $468.00 | |
|
| E4418B-002 |
Parallel rear panel sensor input connector and front panel reference calibrator connector |
| $260.00 | |
|
| E4418B-003 |
Parallel rear panel sensor input connector and rear panel reference calibrator connector |
| $260.00 | |
|
| E4418B-908 |
Rackmount Kit (One Instrument) |
| $104.00 | |
|
| E4418B-909 |
Rackmount Kit (Two Instruments) |
| $104.00 | |
|
| E9287A |
Spare battery pack for EPM power meter |
| $400.00 | |
|
Specifications
| Frequency range |
9 kHz to 110 GHz, sensor dependent |
| Power range |
–70 dBm to +44 dBm (100 pW to 25 W), sensor dependent |
| Power sensors |
Compatible with all 8480 series and E-series sensors |
| Single sensor dynamic range |
90 dB maximum (E-series sensors)
50 dB maximum ( 8480 series sensors) |
| Display units |
| Absolute |
Watts or dBm |
| Relative |
Percent or dB |
| Display resolution |
Selectable resolution of 1.0, 0.1, 0.01, and 0.001 dB in Log mode, or 1 to 4 digits in linear mode |
| Default resolution |
0.01 dB in log mode, 3 digits in linear mode |
|
;)
