Live chat by BoldChat
Need help? We have a staff
of more than 30 people to help you.
Let us show you why over 100,000
customers choose Tequipment.NET
Agilent 668x
Supplemental characteristics
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   



Agilent 668x
Supplemental characteristics



  668x Supplemental characteristics
  (Non-warranted characteristics determined by design and useful in applying the product)

  6680A 6681A 6682A 6683A 6684A 6680A-J04
Ripple and noise constant current mode from 20 Hz to 20 MHz
rms 290 mA 190 mA 40 mA 28 mA 23 mA
Average programming resolution
Voltage 1.35 mV 2.15 mV 5.7 mV 8.6 mV 10.8 mV 12 mV
Current 235 mA 155 mA 64 mA 43 mA 34 mA 260 mA
OVP 30 mV 45 mV 120 mV 180 mV 225 mV 25 mV
Output voltage programming response time 9 ms 12 ms 45 ms 60 ms 60 ms 9 ms
(excludes command-processing time) Full-load progrmming rise or fall time (10 to 90% or 90 to 10%, resistive load)
Output common-mode
noise current (to signal-ground binding post) rms 1.5 mA 1.5 mA 3 mA 3 mA 3 mA 2.0 mA
peak-to-peak 10 mA 10 mA 20 mA 20 mA 20 mA 12.5 mA
Note 1: Option 6680A-JO4 is not available outside the USA because certification process is not complete.


Supplemental characteristics for all 668x model numbers
dc Floating Voltage Output terminals can be floated up to ±60 Vdc maximum from chassis ground
Remote Sensing Up to half the rated output voltage can be dropped in each load lead. The drop in the load leads subtracts from the voltage available for the load.
Command Processing Time Average time required for the output voltage to begin to change following receipt of digital data is 20 ms for power supplies connected directly to the GPIB.
Modulation (analog programming of output voltage and current)
Input Signal 0 to –5 V for voltage, 0 to +5 V for current
Input Impedance 30 k&Ohm;/or greater
ac Input (47 to 63 Hz) 180 to 235 Vac (line-to-line, 3 phase), 27.7 A rms maximum worst case, 21.4 A rms nominal; 360 to 440 Vac, 14.3 A rms maximum worst case, 10.7 A rms nominal (maximum line current includes 5% unbalanced phase voltage condition.) Output voltage derated 5% at 50 Hz and below 200 Vac.
Input Power 7350 VA and 6000 W maximum; 160 W at no load
GPIB Interface Capabilities SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, E1, and C0. IEEE-488.2 and SCPI command set.
Size 425.5 mm W x 221.5 mm H x 674.7 mm D
(16.75 in x 8.75 in x 25.56 in)
Weight Net, 51.3 kg (113 lbs)
Shipping, 63.6 kg (140 lbs)



   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET