| General |
| Measurement resolution |
3 000 count. |
| Reading rate |
2 measures/second. |
| Display |
12.7 mm high, 7 segment liquid crystal display with optional backlighting. |
| Display indicates unit status |
In (measurement) or out (simulation)mode;
Thermocouple type with or without reference junction compensation
Measurement units (°C or °F)
Storage status
Alarm status. |
| Power supply |
9 V alkaline battery (type 6LR61 or 6LF22) giving > 100 hour useful life. |
| Optional |
rechargeable battery kit with external charger plug giving > 20 hour useful life. |
| Connections |
Standard miniature polarised thermocouple plugs (2 pins) or RTD plugs (3 pins) or terminals on process calibrators. |
| Packaging |
ABS antistatic moulded case sculpted for easy hand-held operation. Isolated battery compartment with easily opened flap meets intrinsic safety requirements. Watertight and splash proof to IP50 and 52 standards. Side groove takes detachable sensor probes. |
| Dimensions |
182 mm long, 75 mm wide, 43 mm thick. |
| Weight |
250 grams approx. according to battery and probe fitted. |
| Additional Functions |
Up to 50 measurement values can be stored by pressing "MEM". Values are read out on the display with a sequence number.
Reading "HOLD" function.
Maximum, minimum and average measurements.
Two setpoint alarms (up & low) can be programmed; alarm conditions generatean audible beep and up or down arrows on the display.
Analogue output of the linearised value displayed as a volt signal (1 mV/°C) to drive chart recorders. |
;)
