|
AOIP JN6532-EXB Intrinsically Safe Tester/Calibrator
Click image to enlarge
AOIP JN6532-EXB
|
|
Features:
- Intrinsically Safe Tester/Calibrator
- Up to 7 types of thermocouple and RTD measured and simulated (KTJRSLN)
- Internal or external RJC (reference junction compensation)
- Choice of measurement units (°C or °F)
- 50 value memory
- Maximum, minimum and mean value calculation
- 2 programmable alarms
- Analogue output drives strip or chart recorders
- Backlit large character display
|
Description
|
Process signal calibrators generate and measure mA and mV. These self-contained pocket-sized instruments are exceedingly robust: they will withstand common shocks and are unaffected by hostile enviroments. This model is an Instrinsically Safe Tester/Calibrator. Output: 0 to 12 Vdc, 0 to 24 mAdc. Input: -5 to 30 Vdc, -5 to 30 mAdc.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| JN6532-EXB |
JN6532 Intrinsically Safe Tester/Calibrator |
$734.00 |
| $704.64 |  |
|
| JN6531C |
Pocket V, mA Calibrator |
$457.00 |
| $438.72 | |
|
| JN6532B-B |
Pocket V, mA Tester/Calibrator |
$553.00 |
| $530.88 | |
|
| Model |
Accessories |
List Price |
Sale Price |
| AC6907 |
Batteries/charger Kit 9A |
$143.00 |
| $137.28 | |
|
| AC6908 |
Soft Carry Case for Pocket Instruments |
$53.00 |
| $50.88 | |
|
| CMF654 |
Frequency Calibrator |
$812.00 |
| $779.52 | |
|
Specifications
| General specifications |
| Measurement resolution |
3 000 count. |
| Reading rate |
2 measures/second. |
| Display |
12.7 mm high, 7 segment liquid crystal display with optional backlighting. |
| Display indicates unit status |
In (measurement) or out (simulation) mode
Thermocouple type with or without reference junction compensation
Measurement units (°C or °F)
Storage status
Alarm status. |
| Power supply |
9 V alkaline battery (type 6LR61 or 6LF22) giving > 100 hour useful life.
Optional rechargeable battery kit with external charger plug giving > 20 hour useful life. |
| Connections |
Standard miniature polarised thermocouple plugs (2 pins) or RTD plugs (3 pins) or terminals on process calibrators. |
| Packaging |
ABS antistatic moulded case sculpted for easy hand-held operation.
Isolated battery compartment with easily opened flap meets intrinsic safety requirements.
Watertight and splash proof to IP50 and 52 standards
Side groove takes detachable sensor probes. |
| Dimensions |
182 mm long, 75 mm wide, 43 mm thick. |
| Weight |
250 grams approx. according to battery and probe fitted. |
| Additional functions |
| Memory |
up to 50 measurement values can be stored by pressing "MEM".
Values are read out on the display with a sequence number.
Reading "HOLD" function.
Maximum, minimum and average measurements.
Two setpoint alarms (up & low) can be programmed; alarm conditions generate an audible beep and up or down arrows on the display.
Analogue output of the linearised value displayed as a volt signal (1 mV/°C) to drive chart recorders. |
|
;)
